SSC-SAW8WA2A MINI [Mini-Circuits], SSC-SAW8WA2A Datasheet - Page 21

• Manufacturer Part Number: SSC-SAW8WA2A
• Description: This surface-mount LED comes
• Manufacturer: MINI [Mini-Circuits]

21
21
* Caution
Average ramp-up rate (Tsmax to Tp)
Preheat
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (Tsmin to Tsmax) (ts)
Time maintained above:
- Temperature (TL)
- Time (tL)
Peak Temperature (Tp)
Time within 5°C of actual Peak
Temperature (tp)2
Ramp-down Rate
Time 25°C to Peak Temperature
9. Soldering
1. Reflow soldering is recommended not to be done more than two times.
2. Repairs should not be done after the LEDs have been soldered. When
3. Die slug is to be soldered.
4. When soldering, do not put stress on the LEDs during heating.
5. After soldering, do not warp the circuit board.
In the case of more than 24 hours passed soldering after first, LEDs will be
damaged.
repair is unavoidable, suitable tools must be used.
Profile Feature
3° C/second max.
100 °C
150 °C
60-120 seconds
183 °C
60-150 seconds
215℃
10-30 seconds
6 °C/second max.
6 minutes max.
Sn-Pb Eutectic Assembly
서식번호 : SSC-QP-7-07-12 (Rev.01)
IPC/JEDEC J-STD-020
www.seoulsemicon.com
www.seoulsemicon.com
3° C/second max.
150 °C
200 °C
60-180 seconds
217 °C
60-150 seconds
260℃
20-40 seconds
6 °C/second max.
8 minutes max.
Pb-Free Assembly
Aug 2012
Aug 2012
REV.01
REV.01