SSC-SAW8WA2A MINI [Mini-Circuits], SSC-SAW8WA2A Datasheet - Page 22

• Manufacturer Part Number: SSC-SAW8WA2A
• Description: This surface-mount LED comes
• Manufacturer: MINI [Mini-Circuits]

22
22
(1) Storage
with a desiccant . The recommended storage temperature range is 5C to 30C and a maximum
humidity of RH50%.
(2) Use Precaution after Opening the Packaging
Use proper SMD techniques when the LED is to be soldered dipped as separation of the lens
may affect the light output efficiency.
desiccant changes, components should be dried for 10-12hr at 60±5℃
(3) Do not apply mechanical force or excess vibration during the cooling process to normal
(4) Do not rapidly cool device after soldering.
(5) Components should not be mounted on warped (non coplanar) portion of PCB.
(6) Radioactive exposure is not considered for the products listed here in.
(7) Gallium arsenide is used in some of the products listed in this publication. These products
are dangerous if they are burned or shredded in the process of disposal. It is also dangerous to
(8) This device should not be used in any type of fluid such as water, oil, organic solvent and
etc. When washing is required, IPA (Isopropyl Alcohol) should be used.
(9) When the LEDs are in operation the maximum current should be decided after measuring
the package temperature.
(10) LEDs must be stored properly to maintain the device. If the LEDs are stored for 3 months
or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should
be used for storage.
(11) The appearance and specifications of the product may be modified for improvement
without notice.
(12) Long time exposure of sunlight or occasional UV exposure will cause lens discoloration.
(13) VOCs (Volatile organic compounds) emitted from materials used in the construction of
fixtures can penetrate silicone encapsulants of LEDs and discolor when exposed to heat and
photonic energy. The result can be a significant loss of light output from the fixture.
Knowledge of the properties of the materials selected to be used in the construction of fixtures
can help prevent these issues.
10. Precaution for use
drink the liquid or inhale the gas generated by such products when chemically disposed of.
temperature after soldering.
To avoid the moisture penetration, we recommend storing SSC LEDs in a dry box
Pay attention to the following:
a. Recommend conditions after opening the package
b. If the package has been opened more than 4 week(MSL_2a) or the color of the
- Sealing
- Temperature : 5 ~ 40℃ Humidity : less than RH30%
서식번호 : SSC-QP-7-07-12 (Rev.01)
www.seoulsemicon.com
www.seoulsemicon.com
Aug 2012
Aug 2012
REV.01
REV.01