SSC-UR201 SEOUL [Seoul Semiconductor], SSC-UR201 Datasheet - Page 9

• Manufacturer Part Number: SSC-UR201
• Description: Surface-mounted and leadless chip LED device
• Manufacturer: SEOUL [Seoul Semiconductor]

8. Precaution for Use
(1) Storage
(2) Attention after opened
(3) In case of more than 1 week passed after opening or change color of indicator on desiccant
(4) In case of supposed the components is humid, shall be dried dip-solder just before.
(5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling
(6) Quick cooling shall not be avoid.
(7) Components shall not be mounted on warped direction of PCB.
(8) Anti radioactive ray design is not considered for the products listed here in.
(9) Gallium arsenide is used in some of the products listed in this publication. These products are
(10) This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
(11) When the LEDs are illuminating, operating current should be decided after considering the
(12) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or
(13) The LEDs must be soldered within seven days after opening the moisture-proof packing.
(14) Repack unused products with anti-moisture packing, fold to close any opening and then
(15) The appearance and specifications of the product may be modified for improvement without
In order to avoid the absorption of moisture, it is recommended to store in the dry box (or
However LED is corresponded SMD, when LED be soldered dip, interfacial separation may
desiccator) with a desiccant. Otherwise, to store them in the following environment is
recommended.
affect the light transmission efficiency, causing the light intensity to drop. Attention in followed.
components shall be dried 10-12hr. at 60±5℃.
process to normal temp. after soldering.
dangerous if they are burned or smashed in the process of disposal. It is also dangerous to
drink the liquid or inhale the gas generated by such products when chemically disposed.
When washing is required, IPA should be used.
ambient maximum temperature.
more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be
used for storage.
store in a dry place.
notice.
a. After opened and mounted, the soldering shall be quickly.
b. Keeping of a fraction
100Hr at 80±5℃ or 12Hr at 100±5℃.
Temperature : 5℃~30℃ Humidity : 60%HR max.
Temperature : 5 ~ 40℃
Humidity : less than 30%
서식번호 : SSC-QP-7-07-24 (Rev.0.0)
www.ZLED.com
www.ZLED.com
Revision : 1.0
Revision : 1.0
SSC
SSC
-
-
UR201
UR201