hmc284ms8g Hittite Microwave Corporation, hmc284ms8g Datasheet - Page 5

• Manufacturer Part Number: hmc284ms8g
• Description: Spdt, Hi Isolation Switch Smt, Dc - 3.5 Ghz
• Manufacturer: Hittite Microwave Corporation

10 - 170
10
Typical Application Circuit
Notes:
1. Set A/B control to 0/+5V, Vdd = +5V and use HCT series logic to provide a TTL driver interface.
2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd = +5 Volts applied to the CMOS logic gates.
3. DC blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation.
4. Highest RF signal power capability is acheived wiht Vdd = +7V and A/B set to 0/+7V.
5. Back side paddle must be connected to RF ground.
6. A grounded coplanar waveguide PCB layout technique is recommended to achieve high isolation. The component side
ground plane between RFC/grounded paddle and RF1/RF2 should be continuous, see below. There should be a continu-
ous ground plane under component side layout.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
v06.0607
Order On-line at www.hittite.com
HMC284MS8G
SPDT NON-REFLECTIVE
SWITCH, DC - 3.5 GHz
/
284MS8GE