en29lv800bt-90tip Eon Silicon Solution Inc., en29lv800bt-90tip Datasheet - Page 39

• Manufacturer Part Number: en29lv800bt-90tip
• Description: 8 Megabit 1024k X 8-bit / 512k X 16-bit Flash Memory Boot Sector Flash Memory, Cmos 3.0 Volt-only
• Manufacturer: Eon Silicon Solution Inc.

ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING RANGES
This Data Sheet may be revised by subsequent versions
or modifications due to changes in technical specifications.
Respect to Ground
Notes:
1.
2.
3.
4.
1.
Voltage with
No more than one output shorted at a time. Duration of the short circuit should not be greater than one second.
Minimum DC input voltage on A9, OE#, RESET# pins is –0.5V. During voltage transitions, A9, OE#, RESET# pins may
undershoot V
input voltage on A9, OE#, and RESET# is 11.5V which may overshoot to 12.5V for periods up to 20ns.
Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, inputs may undershoot V
periods of up to 50ns and to –2.0 V for periods of up to 20ns. See figure below. Maximum DC voltage on output and I/O
pins is V
below.
Stresses above the values so mentioned above may cause permanent damage to the device. These values are for a stress
rating only and do not imply that the device should be operated at conditions up to or above these values. Exposure of the
device to the maximum rating values for extended periods of time may adversely affect the device reliability.
Output Short Circuit Current
Ambient Operating Temperature
Operating Supply Voltage
Overshoot Waveform
Recommended Operating Ranges define those limits between which the functionality of the device is guaranteed.
Ambient Temperature
Storage Temperature
Maximum Negative
cc
Plastic Packages
+ 0.5 V. During voltage transitions, outputs may overshoot to V
With Power Applied
Commercial Devices
Industrial Devices
Vcc
Parameter
Parameter
ss
to –1.0V for periods of up to 50ns and to –2.0V for periods of up to 20ns. See figure below. Maximum DC
A9, OE#, Reset#
All other pins
Vcc
Rev. H, Issue Date: 2008/07/07
1
3
2
39
1
+1.5V
Vcc
©2004 Eon Silicon Solution, Inc., www.essi.com.tw
Regulated: 3.0 to 3.6
-0.5 to Vcc+0.5
Full: 2.7 to 3.6
-0.5 to +11.5
-65 to +125
-65 to +125
-55 to +125
-0.5 to +4.0
-40 to 85
0 to 70
Value
Value
200
cc
Overshoot Waveform
Maximum Positive
+ 1.5 V for periods up to 20ns. See figure
EN29LV800B
ss
Unit
Unit
mA
to –1.0V for
°C
°C
°C
°C
V
V
V
V