MG87FE/L2051 MEGAWIN [Megawin Technology Co., Ltd], MG87FE/L2051 Datasheet - Page 20

• Manufacturer Part Number: MG87FE/L2051
• Description: 8-bits microcontroll
• Manufacturer: MEGAWIN [Megawin Technology Co., Ltd]

1: Higher priority, setting with PTCH to select priority level.
Bit 6: EX3, external interrupt 3 enable register.
0: Disable external /INT3.
1: Enable external /INT3. This function will be masked when CMOD.ECF is enabled.
Bit 5: IE3, Interrupt 3 Edge flag.
0: Cleared when interrupt start to be serviced. It also could be cleared by CPU.
1: Set by hardware when external interrupt edge detected. It also could be set by CPU.
Bit 4: IT3, Interrupt 3 type control bit.
0: Cleared by CPU to specify low level triggered on Interrupt 3. If AUXR.INT3H is set, this bit specifies high level
1: Set by CPU to specify falling edge triggered on Interrupt 3. If AUXR.INT3H is set, this bit specifies rising edge
Bit 3: PX2, External interrupt 2 priority-L register.
0: Lower priority, setting with PX2H to select priority level.
1: Higher priority, setting with PX2H to select priority level.
Bit 2: EX2, external interrupt 2 enable register.
0: Disable external interrupt 2.
1: Enable external interrupt 2. This function will be masked when IE.EAC is enabled.
Bit 1: IE2, Interrupt 2 Edge flag.
0: Cleared when interrupt start to be serviced. It also could be cleared by CPU.
1: Set by hardware when external interrupt edge detected. It also could be set by CPU.
Bit 0: IT2, Interrupt 2 type control bit.
0: Cleared by CPU to specify low level triggered on /INT2. If AUXR.INT2H is set, this bit specifies high level
1: Set by CPU to specify falling edge triggered on /INT2. If AUXR.INT2H is set, this bit specifies rising edge
IPL: Interrupt Priority Low Register
Address=B8H, read/write, Power On + RESET=X0X0-0000
Bit 7: reserved.
Bit 6: PAC, Analog Comparator interrupt priority-L register.
Bit 5: Reserved.
Bit 4: PS, Serial port interrupt priority-L register.
Bit 3: PT1, Timer 1 interrupt priority-L register.
Bit 2: PX1, external interrupt 1 priority-L register.
Bit 1: PT0, Timer 0 interrupt priority-L register.
Bit 2: PX0, external interrupt 0 priority-L register.
IPH: Interrupt Priority High Register
Address=B7H, read/write, Power On + RESET=00X0-0000
PX3H/PTCH PX2H/PACH
This document information is the intellectual property of Megawin Technology.
© Megawin Technology Co., Ltd. 2009 All rights reserved.
QP-7300-03D
20/56
triggered on /INT3.
triggered on /INT3.
triggered on /INT2.
triggered on /INT2.
7
-
7
MEGAWIN
MAKE YOU WIN
PAC
6
6
--
5
--
5
PS
PSH
4
4
PT1
PT1H
3
3
MG87FE/L2051/4051/6051
PX1
PX1H
2
2
PT0
PT0H
1
1
Preliminary, v 1.03
PX0
PX0H
0
0