AT89S8252-16JA ATMEL [ATMEL Corporation], AT89S8252-16JA Datasheet - Page 12

• Manufacturer Part Number: AT89S8252-16JA
• Description: 8-Bit Microcontroller with 8K Bytes Flash
• Manufacturer: ATMEL [ATMEL Corporation]

Capture Mode
Figure 1. Timer 2 in Capture Mode
12
T2EX PIN
OSC
AT89S8252
T2 PIN
÷12
TRANSITION
DETECTOR
Since two machine cycles (24 oscillator periods) are required to recognize a 1-to-0 tran-
sition, the maximum count rate is 1/24 of the oscillator frequency. To ensure that a given
level is sampled at least once before it changes, the level should be held for at least one
full machine cycle.
Table 8. Timer 2 Operating Modes
In the capture mode, two options are selected by bit EXEN2 in T2CON. If EXEN2 = 0,
Timer 2 is a 16-bit timer or counter which upon overflow sets bit TF2 in T2CON. This bit
can then be used to generate an interrupt. If EXEN2 = 1, Timer 2 performs the same
operation, but a l-to-0 transition at external input T2EX also causes the current value in
TH2 and TL2 to be captured into RCAP2H and RCAP2L, respectively. In addition, the
transition at T2EX causes bit EXF2 in T2CON to be set. The EXF2 bit, like TF2, can
generate an interrupt. The capture mode is illustrated in Figure 1.
C/T2 = 0
C/T2 = 1
RCLK + TCLK
X
0
0
1
EXEN2
TR2
CAPTURE
CONTROL
CONTROL
CP/RL2
0
1
X
X
RCAP2H
TH2
EXF2
RCAP2L
TR2
1
1
1
0
TL2
MODE
16-bit Auto-reload
16-bit Capture
Baud Rate Generator
(Off)
OVERFLOW
TF2
INTERRUPT
0401F–MICRO–11/03
TIMER 2