LPC2460FET208 PHILIPS [NXP Semiconductors], LPC2460FET208 Datasheet - Page 32

• Manufacturer Part Number: LPC2460FET208
• Description: Flashless 16-bit/32-bit micro; Ethernet, CAN, ISP/IAP, USB 2.0 device/host/OTG, external memory interface
• Manufacturer: PHILIPS [NXP Semiconductors]

NXP Semiconductors
LPC2460_0
Preliminary data sheet
7.10.2.1 Features
7.10.3.1 Features
7.10.3 USB OTG Controller
7.11.1 Features
7.11 CAN controller and acceptance filters
USB OTG (On-The-Go) is a supplement to the USB 2.0 specification that augments the
capability of existing mobile devices and USB peripherals by adding host functionality for
connection to USB peripherals.
The OTG Controller integrates the Host Controller, device controller, and a master-only
I
controls an external OTG transceiver.
The Controller Area Network (CAN) is a serial communications protocol which efficiently
supports distributed real-time control with a very high level of security. Its domain of
application ranges from high-speed networks to low cost multiplex wiring.
The CAN block is intended to support multiple CAN buses simultaneously, allowing the
device to be used as a gateway, switch, or router between two of CAN buses in industrial
or automotive applications.
Each CAN controller has a register structure similar to the NXP SJA1000 and the PeliCAN
Library block, but the 8-bit registers of those devices have been combined in 32-bit words
to allow simultaneous access in the ARM environment. The main operational difference is
that the recognition of received Identifiers, known in CAN terminology as Acceptance
Filtering, has been removed from the CAN controllers and centralized in a global
Acceptance Filter.
2
•
•
•
C interface to implement OTG dual-role device functionality. The dedicated I
•
•
•
•
•
•
•
•
•
OHCI compliant.
Two downstream ports.
Supports per-port power switching.
Fully compliant with On-The-Go supplement to the USB 2.0 Specification, Revision
1.0a.
Hardware support for Host Negotiation Protocol (HNP).
Includes a programmable timer required for HNP and Session Request Protocol
(SRP).
Supports any OTG transceiver compliant with the OTG Transceiver Specification
(CEA-2011), Rev. 1.0.
Two CAN controllers and buses.
Data rates to 1 Mbit/s on each bus.
32-bit register and RAM access.
Compatible with CAN specification 2.0B, ISO 11898-1.
Global Acceptance Filter recognizes 11-bit and 29-bit receive identifiers for all CAN
buses.
Rev. 00.01 — 5 October 2007
Fast communication chip
LPC2460
© NXP B.V. 2007. All rights reserved.
2
C interface
32 of 67