LPC2880FET180 PHILIPS [NXP Semiconductors], LPC2880FET180 Datasheet - Page 20

• Manufacturer Part Number: LPC2880FET180
• Description: 16/32-bit ARM microcontrollers; 8 kB cache, up to 1 MB flash, Hi-Speed USB 2.0 device, and SDRAM memory interface
• Manufacturer: PHILIPS [NXP Semiconductors]

Philips Semiconductors
LPC2880_LPC2888_1
Preliminary data sheet
6.13.1 Features
6.14.1 Features
6.15.1 Features
6.13 UART and IrDA
6.14 I
6.15 10-bit A/D converter
The LPC2880/LPC2888 contains one UART with baud rate generator and IrDA support.
The LPC2880/LPC2888 I
master Transmit mode, master Receive mode, slave Transmit mode and slave Receive
mode. The interface complies with the entire I
power off to the LPC2880/LPC2888 without causing a problem with other devices on the
same I
The LPC2880/LPC2888 contains a single 10-bit successive approximation analog to
digital converter with five multiplexed channels.
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C-bus interface
An interrupt to the processor can be generated on DMA completion, when a DMA
channel is halfway to completion, or when a DMA error has occurred.
32-B Receive and Transmit FIFOs.
Register locations conform to the 16C650 industry standard.
Receiver FIFO trigger points at 1 B, 16 B, 24 B, and 28 B.
Built-in baud rate generator.
CGU generates UART clock including fractional divider capability.
Auto baud capability.
Optional hardware flow control.
IrDA mode for infrared communication.
Standard I
Arbitration between simultaneously transmitting masters without corruption of serial
data on the bus.
Programmable clock allows adjustment of I
Bidirectional data transfer between masters and slaves.
Serial clock synchronization allows devices with different bit rates to communicate via
one serial bus.
Serial clock synchronization can be used as a handshake mechanism to suspend and
resume serial transfer.
Supports normal (100 kHz) and fast (400 kHz) operation.
10-bit successive approximation analog to digital converter.
Input multiplexing among 5 pins.
2
C-bus.
2
C-bus interface, configurable as Master, Slave, or Master/Slave.
16/32-bit ARM microcontrollers with external memory interface
Rev. 01 — 22 June 2006
2
C-bus interface is byte oriented and has four operating modes:
2
C-bus specification, and allows turning
2
C-bus transfer rates.
LPC2880; LPC2888
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
20 of 34