MC9S12Q32VFA16 FREESCALE [Freescale Semiconductor, Inc], MC9S12Q32VFA16 Datasheet - Page 349

• Manufacturer Part Number: MC9S12Q32VFA16
• Description: HCS12 Microcontrollers
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

12.2.4
This pin serves as waveform output of PWM channel 0.
12.3
This subsection describes in detail all the registers and register bits in the PWM8B4C module.
The special-purpose registers and register bit functions that would not normally be made available to
device end users, such as factory test control registers and reserved registers are clearly identified by means
of shading the appropriate portions of address maps and register diagrams. Notes explaining the reasons
for restricting access to the registers and functions are also explained in the individual register descriptions.
12.3.1
The following paragraphs describe the content of the registers in the PWM8B4C module. The base address
of the PWM8B4C module is determined at the MCU level when the MCU is defined. The register decode
map is fixed and begins at the first address of the module address offset.
Reserved bits within a register will always read as 0 and the write will be unimplemented. Unimplemented
functions are indicated by shading the bit.
Table 12-2
Freescale Semiconductor
Memory Map and Registers
shows the memory map for the PWM8B4C module.
PWM0 — Pulse Width Modulator Channel 0 Pin
Module Memory Map
Register address = base address + address offset, where the base address is
defined at the MCU level and the address offset is defined at the module
level.
Chapter 12 Pulse-Width Modulator (PWM8B4CRev 01.24) Block Description
MC9S12Q128
Rev 1.10
NOTE
349