SAB80C515A-M18-T3 Siemens Semiconductor Group, SAB80C515A-M18-T3 Datasheet - Page 29

• Manufacturer Part Number: SAB80C515A-M18-T3
• Description: 8-Bit CMOS Single-Chip Microcontroller
• Manufacturer: Siemens Semiconductor Group

Capture
This feature permits saving of the actual timer/counter contents into a selected register upon
an external event or a software write operation. Two modes are provided to latch the current
16-bit value of timer 2 registers TL2 and TH2 into a dedicated capture register.
Mode 0:
Mode 1:
Compare
In compare mode, the 16-bit values stored in the dedicated compare registers are compared
to the contents of the timer 2 registers. If the count value in the timer 2 registers matches one
of the stored values, an appropriate output signal is generated and an interrupt is requested.
Two compare modes are provided:
Mode 0:
Mode 1:
Semiconductor Group
Capture is performed in response to a transition at the corresponding
port 1 pins CC0 to CC3.
Write operation into the low-order byte of the dedicated capture
register causes the timer 2 contents to be latched into this register.
Upon a match the output signal changes from low to high. It goes
back to low level when timer 2 overflows.
The transition of the output signal can be determined by software.
A timer 2 overflow causes no output change.
28
SAB 80C515A/83C515A-5