ATTIny2313-16MI ATMEL Corporation, ATTIny2313-16MI Datasheet - Page 106

• Manufacturer Part Number: ATTIny2313-16MI
• Description: 8-bit AVR Microcontroller with 2K Bytes In-System Programmable Flash
• Manufacturer: ATMEL Corporation

106
ATtiny2313/V
Note:
Table 46 shows the COM1x1:0 bit functionality when the WGM13:0 bits are set to the
phase correct or the phase and frequency correct, PWM mode.
Table 46. Compare Output Mode, Phase Correct and Phase and Frequency Correct
PWM
Note:
• Bit 1:0 – WGM11:0: Waveform Generation Mode
Combined with the WGM13:2 bits found in the TCCR1B Register, these bits control the
counting sequence of the counter, the source for maximum (TOP) counter value, and
what type of waveform generation to be used, see Table 47. Modes of operation sup-
ported by the Timer/Counter unit are: Normal mode (counter), Clear Timer on Compare
match (CTC) mode, and three types of Pulse Width Modulation (PWM) modes. (See
“Modes of Operation” on page 95.).
COM1A1/COM1B1
(1)
1. A special case occurs when OCR1A/OCR1B equals TOP and COM1A1/COM1B1 is
1. A special case occurs when OCR1A/OCR1B equals TOP and COM1A1/COM1B1 is
0
0
1
1
set. In this case the compare match is ignored, but the set or clear is done at TOP.
See “Fast PWM Mode” on page 97. for more details.
set. See “Phase Correct PWM Mode” on page 99. for more details.
COM1A0/COM1B0
0
1
0
1
Description
Normal port operation, OC1A/OC1B
disconnected.
WGM13=0: Normal port operation, OC1A/OC1B
disconnected.
WGM13=1: Toggle OC1A on Compare Match,
OC1B reserved.
Clear OC1A/OC1B on Compare Match when up-
counting. Set OC1A/OC1B on Compare Match
when downcounting.
Set OC1A/OC1B on Compare Match when up-
counting. Clear OC1A/OC1B on Compare Match
when downcounting.
2543C–AVR–12/03