EVAL-ADV7533-SAZ AD [Analog Devices], EVAL-ADV7533-SAZ Datasheet - Page 10

• Manufacturer Part Number: EVAL-ADV7533-SAZ
• Description: MIPI/DSI Receiver
• Manufacturer: AD [Analog Devices]

ADV7533
Pin No.
G7
E2, E4, G1
C6
B1
B2, B3, B5, B6, C7,
E1, E7, F1, F7
E5
E6
D2
D1
D6
D7
1
I = input, O = output, P = power supply, C = control.
Mnemonic
A2VDD
DVDD
PVDD
V3P3
GND
SDA
SCL
DDCSDA
DDCSCL
CEC
CEC_CLK
Type
P
P
P
P
P
C
C
C
C
I/O
I
1
Description
1.8 V Power Supply for MIPI/DPHY Input. Should be filtered and as quiet as possible.
1.8 V Power Supply for Digital and I/O Power Supply. Supply power to the digital logic
and I/Os. Should be filtered and as quiet as possible.
1.8 V Power Supply for the PLL. Should be filtered and as quiet as possible. This supply is
the most noise sensitive.
3.3 V programming pin for HDCP nonvolatile memory.
Ground for all domains.
Serial Port Data I/O. Serves as the serial port data I/O slave for register access. Supports
CMOS logic levels from 1.8 V to 3.3 V.
Serial Port Data Clock. Serves as the serial port data clock slave for register access.
Supports CMOS logic levels from 1.8 V to 3.3 V.
Serial Port Data I/O to Receiver. Serves as the master to the DDC bus. 5 V CMOS logic
level.
Serial Port Data Clock to Receiver. Serves as the master clock for the DDC bus. 5 V CMOS
logic level.
CEC I/O. If unused, pin should be connected to ground.
CEC External Clock. Can be from 3 MHz to 100 MHz. Settings default to 12 MHz. If
unused, pin should be connected to ground.
Rev. 0 | Page 10 of 12