AC-161A ETC1 [List of Unclassifed Manufacturers], AC-161A Datasheet - Page 15

• Manufacturer Part Number: AC-161A
• Description: SPECIFICATIONS FOR LCD MODULE
• Manufacturer: ETC1 [List of Unclassifed Manufacturers]

13 QUALITY AND RELIABILITY
normal inspection, and single sampling plan tables for normal, tightened, and reduced
inspection.
the usability of the unit for its intended purpose. A minor defect is one that does not
materially reduce the usability of the unit for its intended purpose or is an infringement from
established standards and has no significant bearing on its effective use or operation.
distance from the LCD module under flourescent light. The inspection area of LCD panel
shall be within the range of following limits.
Tests should be conducted under the following conditions :
Ambient temperature : 25
Humidity
13.1 TEST CONDITIONS
13.2 SAMPLING PLAN
13.3 ACCEPTABLE QUALITY LEVEL
13.4 APPEARANCE
Sampling method shall be in accordance with MIL-STD-105E, inspection level II,
A major defect is defined as one that could cause failure to or materially reduce
An appearance test should be conducted by human sight at approximately 30 cm
: 60
25% RH.
5 C
AMPIRE CO., LTD.
15