ZL50400GDC ZARLINK [Zarlink Semiconductor Inc], ZL50400GDC Datasheet - Page 43
ZL50400GDC
Manufacturer Part Number
ZL50400GDC
Description
Lightly Managed/Unmanaged 9-Port 10/100 M Ethernet Switch
Manufacturer
ZARLINK [Zarlink Semiconductor Inc]
Datasheet
1.ZL50400GDC.pdf
(124 pages)
- Current page: 43 of 124
- Download datasheet (723Kb)
be removed based on the hash key. In this example, we assume port 0 and 1 are removed. As a result, port 2,5 and
6 are the only outgoing ports for this multicast packet.
9.0
See Traffic Mirroring application note, ZLAN-50, for more information.
9.1
Packets can be mirrored (duplicated) for network monitor purpose and/or network debug purpose. Three types of
mirroring is available in ZL50400.
1. Source or Destination MAC address based
2. Flow based
3. Port based
In source or destination mac address based mirroring, the “M” bit of the mirroring MAC address in the MCT is set.
Also, the user need to specify the mirroring MAC address is source or destination of the packet. If source is
selected, any packet received with the mirroring MAC address as source MAC address will be copied to the
mirrored port. In the same way, if destination is selected, any packet received with mirroring MAC address as
destination MAC address will be copied to the mirrored port.
In flow based mirroring, a flow is established based on the source and destination mac address pair. When
enabled, a packet with source and destination address match the pre-programmed source and destination mac
address pair will be copied to the mirrored port. In reverse direction (source and destination match pre programmed
destination and source), the flow can also be enabled and the frame will be copied to the mirrored port.
In port based mirroring, traffic from any RMAC port can be mirrored to any RMAC port. The traffic from the source
port can be either ingress or egress traffic. Up to two ports can be setup as mirrored ports. As a result, the traffic
(both ingress and egress) of a specific port can be monitored by setting up both mirrored ports. Once a port is setup
as mirrored port, it cannot be used for regular traffic.
The mirrored port can be any port in the ZL50400.
9.2
To perform remote loop back test, port mirroring can be used to bounce back the packet to the source port to check
the data path.
The CPU needs to setup the remote device through the command channel to enable port mirroring in the remote
device. A CPU packet is send to the port in test in Device A. The packet will be forwarded to the test port, external
cable, the destination port in Device B, and loop back to itself, back to the cable and go back to Device A and the
CPU. This way, the whole channel can be tested.
Mirroring Features
Using port mirroring for loop back
Traffic Mirroring
DEVICE A
CPU
Figure 9 - Remote Loopback Test
Zarlink Semiconductor Inc.
ZL50400
43
DEVICE B
Data Sheet
Related parts for ZL50400GDC
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Zarlink Semiconductor Inc [TV IF PREAMPLIFIER]
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
Satellite Channel Decoder
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
Power Factor Controller
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
CMOS/SNOS NVSRAM HIGH PERFORMANCE 8 K x 8 NON-VOLATILE STATIC RAM
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
Dual stage IF amplifier for cable tuners
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
Synthesized Broadband Converter with Programmable Power
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
Cable Tuner Front End LNA with AGC
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
Front End Power Splitter with AGC
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
1.3GHz Dual Wideband Logarithmic Amplifier
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
Wide Dynamic Range Image Reject MOPLL
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
WIDEBAND PLL FM DETECTOR FOR SATELLITE TV
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
WIDEBAND LINEAR FM DETECTOR FOR SATELLITE TV
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
WIDEBAND LOG IF STRIP AMPLIFIER
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
WIDEBAND LOG IF STRIP AMPLIFIER
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
Part Number:
Description:
THIS DOCUMENT IS FOR MAINTENANCE PURPOSES ONLY AND IS NOT RECOMMENDED FOR NEW DESIGNS
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet: