CBTU4411EE,518 NXP Semiconductors, CBTU4411EE,518 Datasheet - Page 16

• Manufacturer Part Number: CBTU4411EE,518
• Description: IC BUS SWITCH 11-BIT 72-LFBGA
• Manufacturer: NXP Semiconductors
• Series: CBTr
• Type: Bus Switchr

Specifications of CBTU4411EE,518

• Package / Case: 72-LFBGA
• Circuit: 2 x 4:1
• Independent Circuits: 1
• Voltage Supply Source: Single Supply
• Voltage - Supply: 1.7 V ~ 1.9 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Output High, Low: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 935276913518; CBTU4411EE-T; CBTU4411EE-T

NXP Semiconductors
CBTU4411_3
Product data sheet
15.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 11.
Table 12.
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
2.5
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 11
SnPb eutectic process (from J-STD-020C)
Lead-free process (from J-STD-020C)
and
Figure
12
15.
Rev. 03 — 12 October 2009
11-bit DDR2 SDRAM MUX/bus switch with 12
Package reflow temperature ( C)
Volume (mm
< 350
235
220
Package reflow temperature ( C)
Volume (mm
< 350
260
260
250
3
3
)
)
Figure
350 to 2000
260
250
245
15) than a SnPb process, thus
220
220
350
CBTU4411
> 2000
260
245
245
© NXP B.V. 2009. All rights reserved.
ON resistance
16 of 20