SM363FX COOPER [Cooper Bussmann, Inc.], SM363FX Datasheet - Page 31

• Manufacturer Part Number: SM363FX
• Description: Safety Module fused disconnect switch
• Manufacturer: COOPER [Cooper Bussmann, Inc.]

15149 Series
Specifications
• Fuse holders in the pull-out head eliminate possibility of
• Accepts Class J fuses
To order, specify: 15149 + number of poles.
Example: 15149-2 = 2-pole device.
Data Sheet: 1141
Description: Fused, dead front disconnect switches
Ratings:
Dielectric SCCR: 2200V
Motor Rating: 5hp
Poles: 2 to 3
Agency Information: UL Recognized, file E116716 for
General Industrial installations. Guide WFXV2. CSA certified,
file LR37129-6. Examined under the new proposed standard
UL 1429 which imparts a stricter set of test conditions than
the former program that combined the applicable portions for
UL 512 (Fuse Holders) and UL 98 (Enclosed Switches).
Features and Benefits
Ordering Information
SCCR: — 200,000A RMS Sym.
Amps: — 0-30A
electric shock while changing fuse.
Volts: — 600Vac
Disconnects
Fused, dead front disconnect switches
For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp
All-Inclusive Elevator Disconnect
Simplifies Installation Plus a
Multitude of Codes and Standards
specified the Cooper Bussmann
elevator shunt trip disconnect. The primary reason
was the savings in man-hours with everything in one
box: the fire alarm, control wiring and power wiring;
all the parts needed to interface with a fire alarm
system in a UL 98 Listed assembly. In addition, all
the codes and standards surrounding the elevator
disconnecting means – electrical, elevator, fire alarm
and the sprinkler system – are met, including
ANSI/ASME A17.1, NFPA 72, NEC
The contractor faced a unique situation when the
luxury hotel chain chose to revamp the old
warehouse versus tearing the structure down and
rebuilding. The hotel complex consists of four
buildings interconnected with walkways. A total of
eight elevators were installed with eight Power
Module switches, two per building. Each 30 HP
passenger elevator is fused with Cooper Bussmann
Low-Peak
40HP service elevator uses the Class J
LPJ-90SP fuses.
Did You Know?
®
Class J LPJ-70SP fuses while each
®
Power Module™
When the Westin
Hotel chain
renovated the
historic Cupples
Station in
downtown St.
Louis, the hotel’s
design-and-build
electrical
contractor
®
620.62.
337
®