MAX1090BEEI Maxim Integrated, MAX1090BEEI Datasheet - Page 9

• Manufacturer Part Number: MAX1090BEEI
• Description: Analog to Digital Converters - ADC
• Manufacturer: Maxim Integrated

Specifications of MAX1090BEEI

• Number Of Channels: 8/4
• Architecture: SAR
• Conversion Rate: 400 KSPs
• Resolution: 10 bit
• Input Type: Single-Ended/Pseudo-Differential
• Snr: Yes
• Interface Type: Parallel
• Operating Supply Voltage: 2.7 V to 5.5 V, 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: QSOP-28
• Maximum Power Dissipation: 667 mW
• Minimum Operating Temperature: - 40 C
• Number Of Converters: 1
• Voltage Reference: Internal 2.5 V or External

The MAX1090/MAX1092 ADCs use a successive-
approximation (SAR) conversion technique and an input
track-and-hold (T/H) stage to convert an analog input
signal to a 10-bit digital output. Their parallel (8 + 2) out-
put format provides an easy interface to standard micro-
processors (µPs). Figure 2 shows the simplified internal
architecture of the MAX1090/MAX1092.
The sampling architecture of the ADC’s analog com-
parator is illustrated in the equivalent input circuits in
Figures 3a and 3b. In single-ended mode, IN+ is inter-
nally switched to channels CH0–CH7 for the MAX1090
(Figure 3a) and to CH0–CH3 for the MAX1092 (Figure
3b), while IN- is switched to COM (Table 3). In differen-
tial mode, IN+ and IN- are selected from analog input
pairs (Table 4).
Figure 2. Simplified Functional Diagram of 8-/4-Channel MAX1090/MAX1092
(CH7)
(CH6)
(CH5)
(CH4)
COM
CH3
CH2
CH1
CH0
CLK
WR
INT
CS
RD
with +2.5V Reference and Parallel Interface
( ) ARE FOR MAX1090 ONLY.
Pseudo-Differential Operation
_______________________________________________________________________________________
CLOCK
400ksps, +5V, 8-/4-Channel, 10-Bit ADCs
MULTIPLEXER
Detailed Description
ANALOG
INPUT
CONTROL LOGIC
Converter Operation
LATCHES
AND
Single-Ended and
T/H
8
CHARGE REDISTRIBUTION
REF
THREE-STATE, BIDIRECTIONAL
10-BIT DAC
I/O INTERFACE
In differential mode, IN- and IN+ are internally switched to
either of the analog inputs. This configuration is pseudo-
differential in that only the signal at IN+ is sampled. The
return side (IN-) must remain stable within ±0.5 LSB
(±0.1 LSB for best performance) with respect to GND
during a conversion. To accomplish this, connect a
0.1µF capacitor from IN- (the selected input) to GND.
During the acquisition interval, the channel selected as
the positive input (IN+) charges capacitor C
the end of the acquisition interval, the T/H switch
opens, retaining the charge on C
the signal at IN+.
The conversion interval begins with the input multiplex-
er switching C
negative input (IN-). This unbalances node ZERO at the
comparator’s positive input. The capacitive digital-to-
analog converter (DAC) adjusts during the remainder of
the conversion cycle to restore node ZERO to 0V within
the limits of 10-bit resolution. This action is equivalent to
transferring a 12pF [(V
to the binary-weighted capacitive DAC, which in turn
forms a digital representation of the analog input signal.
APPROXIMATION
2
2
SUCCESSIVE-
8-BIT DATA BUS
REGISTER
MUX
10
D0–D7
8
A
8
2.05
8
V
=
HOLD
REFADJ
from the positive input (IN+) to the
COMP
IN+
17kΩ
) - (V
MAX1090
MAX1092
IN-
REFERENCE
1.22V
)] charge from C
HOLD
as a sample of
HOLD
HBEN
V
V
GND
DD
LOGIC
HOLD
. At
9