PCA9535ECDTR2G ON Semiconductor, PCA9535ECDTR2G Datasheet - Page 14

• Manufacturer Part Number: PCA9535ECDTR2G
• Description: Interface - I/O Expanders 16-BIT I/O EXPANDER
• Manufacturer: ON Semiconductor

Specifications of PCA9535ECDTR2G

• Product Category: Interface - I/O Expanders
• Rohs: yes
• Logic Family: PCA9535
• Number Of I/os: 16
• Maximum Operating Frequency: 400 KHz
• Operating Supply Voltage: 1.65 V to 5.5 V
• Operating Temperature Range: - 55 C to + 125 C
• Mounting Style: SMD/SMT
• Package / Case: TSSOP-24
• Interface Type: I2C, SMBus
• Interrupt Output: Yes
• Operating Current: 100 uA
• Output Current: 50 mA
• Power Dissipation: 600 mW
• Product Type: I/O Expanders

Characteristics of the I
between different ICs or modules. The two lines are the
serial data line (SDA) and the serial clock line (SCL). Both
lines must be connected to a positive supply via a pull−up
resistor when connected to the output stages of a device.
Data transfer may only be initiated when the bus is not busy.
START and STOP conditions
not busy. A START condition (S) occurs when there is a
HIGH−to−LOW transition of the data line while the clock is
The I
Both data and clock lines remain HIGH when the bus is
Figure 12. High Value Resistor in Parallel
2
C−bus is meant for 2−way, 2−line communication
SDA
SCL
V
DD
LEDn
START condition
with the LED
2
SDA
SCL
C−bus
S
Figure 15. Definition of START and STOP Conditions
LED
100 kW
V
DD
data valid
data line
stable;
Figure 14. Bit Transfer
http://onsemi.com
14
allowed
change
of data
Bit transfer
data on the SDA line must remain stable during the HIGH
period of the clock pulse. Changes in the data line during the
HIGH period of the clock pulse will be interpreted as control
signals (see Figure 14).
HIGH. A STOP condition (P) occurs when there is a
LOW−to−HIGH transition of the data line while the clock is
HIGH (see Figure 15).
One data bit is transferred during each clock pulse. The
Figure 13. Device Supplied by a Lower Voltage
3.3 V
V
STOP condition
DD
LEDn
P
5 V
LED
SDA
SCL