Z4A2321 Memtech, Z4A2321 Datasheet - Page 31

• Manufacturer Part Number: Z4A2321
• Description: Solid State Drives - SSD 32GB DRIVE IND TEMP
• Manufacturer: Memtech

Specifications of Z4A2321

• Product Category: Solid State Drives - SSD
• Product: SATA Flash Drives
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C

Zeus 2.5-Inch ATA Solid State Drive
Power Savings Commands
Zeus SSDs support the following Power Savings commands and respond with the appropriate status:
The drives comply with all specifications that define the behavior of storage devices as it relates to
power management and advanced power management (APM). When the SSDs receive a power
management command, all data in the Write cache buffer is written to the media before Drive Ready
is asserted.
Power Mode at Power On
The drives comply with the ATA-6 Power Management Specification. During the Power On Reset
sequence, the drive functions properly and responds as appropriate. In addition, if a SRST (ATA
Interface Reset) occurs during this sequence, the drives still respond normally. After power on or hard
reset, the drive goes into IDLE or STANDBY mode, depending on the setting by the host.
Grounding
Signal and chassis grounds are connected together in the drive. To ensure minimal EM emissions,
the user should provide maximum surface contact area when connecting the drive to the chassis
ground.
•
•
•
•
•
Check Power Mode
Idle
Standby
Standby Immediate
Sleep
15