E910.72A61DC ELMOS Semiconductor, E910.72A61DC Datasheet - Page 31

• Manufacturer Part Number: E910.72A61DC
• Description: Motor / Motion / Ignition Controllers & Drivers 6x HVAC motor driver/pulse count
• Manufacturer: ELMOS Semiconductor
• Type: DC Motor 6x Half Bridger

Specifications of E910.72A61DC

• Rohs: yes
• Product: Brushed DC Motor Drivers
• Operating Supply Voltage: 5 V
• Supply Current: 3 mA
• Operating Temperature: - 40 C to + 85 C
• Mounting Style: SMD/SMT
• Package / Case: QFN-32
• Number Of Outputs: 5
• Output Current: 100 mA
• Output Voltage: 6 V to 19 V
• Power Dissipation: 1 W

number of counts by an average value derived from statistical tests. Nevertheless, to keep the correct position it is
mandatory to consider the real number of counts read back from the SPI.
Different fault conditions may occur during motor movement. In case of VBAT_HV over/under-voltage, and mo-
tor stall (no ripples for 200ms), low side switches of both half bridges will be turned on to brake the motor, and no
pulses will get lost. Output DRB gets activated and the actual detected number of counts, eventually together with
the diagnostic information "Motor Stall", are available via SPI. Overcurrent as well as overtemperature causes half
bridges to be switched into tristate mode. Pulses that occur during motor run-out will thus not be detected. DRB
will be activated and the last number of counts that has been detected is available together with the diagnostic
information from which can be seen that the position might be incorrect.
6 package reference
This product is available in a Pb free, RoHS compliant, QFN32L5 plastic package. For dimension details refer to
JEDEC MO-220 VHHD-4.
The package is classified to Moisture Sensitivity Level 3 (MSL 3) according to JEDEC J-STD-020 with a soldering
peak temperature of (260+5)°C.
DC Motor 6 x Half briDgE witH ripplE CoUnt
aDVanCE proDUCt inforMation - MaY 05, 2011
ELMOS Semiconductor AG
Data Sheet
31/34
QM-No.: 25DS0057E.00
E910.72