IS43R16160B-6TL ISSI, Integrated Silicon Solution Inc, IS43R16160B-6TL Datasheet - Page 7

• Manufacturer Part Number: IS43R16160B-6TL
• Description: IC DDR SDRAM 256MBIT 66TSOP
• Manufacturer: ISSI, Integrated Silicon Solution Inc

Specifications of IS43R16160B-6TL

• Package / Case: 66-TSOPII
• Memory Size: 256M (16Mx16)
• Format - Memory: RAM
• Memory Type: DDR SDRAM
• Speed: 166MHz
• Interface: Parallel
• Voltage - Supply: 2.5 V ~ 2.7 V
• Operating Temperature: 0°C ~ 70°C
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 167 MHz
• Access Time: 0.7 ns
• Supply Voltage (max): 2.7 V
• Supply Voltage (min): 2.3 V
• Maximum Operating Current: 250 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 706-1086; IS43R16160B-6TL

DDR SDRAM (Rev.1.1)
Write (WRITE) [/RAS =H, /CAS =/WE =L]
Precharge (PRE) [/RAS =L, /CAS =H, /WE =L]
Auto-Refresh (REFA) [/RAS =/CAS =L, /WE =CKE =H]
IS43R83200B
IS43R16160B, IC43R16160B
Activate (ACT) [/RAS =L, /CAS =/WE =H]
Read (READ) [/RAS =H, /CAS =L, /WE =H]
Integrated Silicon Solution, Inc.
Rev. B
10/31/08
/CAS latency. When A10 =H at this command, the bank is deactivated after the burst read (auto-
precharge, READA)
ACT command activates a row in an idle bank indicated by BA.
READ command starts burst read from the active bank indicated by BA. First output data appears after
(auto-precharge, WRITEA)
/write operation. When A10 =H at this command, all banks are deactivated (precharge all, PREA ).
internally. After this command, the banks are precharged automatically.
BASIC FUNCTIONS
ISSI's 256-Mbit DDR SDRAM provides basic functions, bank (row) activate, burst read / write, bank
(row) precharge, and auto / self refresh. Each command is defined by control signals of /RAS,
/CAS and /WE at CLK rising edge. In addition to 3 signals, /CS , CKE and A10 are used as chip
select, refresh option, and precharge option, respectively. To know the detailed definition of
commands, please see the command truth table.
WRITE command starts burst write to the active bank indicated by BA. Total data length to be written
is set by burst length. When A10 =H at this command, the bank is deactivated after the burst write
PRE command deactivates the active bank indicated by BA. This command also terminates burst read
REFA command starts auto-refresh cycle. Refresh address including bank address are generated
/CLK
CLK
/CS
/RAS
/CAS
/WE
CKE
A10
Preliminary
Preliminary
Chip Select : L=select, H=deselect
Command
Command
Command
Refresh Option @refresh command
Precharge Option @precharge or read/write command
256M Double Data Rate Synchronous DRAM
define basic commands
A3S56D30/40ETP
7