DS1244Y-70+ Maxim Integrated Products, DS1244Y-70+ Datasheet - Page 7

• Manufacturer Part Number: DS1244Y-70+
• Description: IC NVSRAM 256KBIT 70NS 28DIP
• Manufacturer: Maxim Integrated Products

Specifications of DS1244Y-70+

• Format - Memory: RAM
• Memory Type: NVSRAM (Non-Volatile SRAM)
• Memory Size: 256K (32K x 8)
• Speed: 70ns
• Interface: Parallel
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 28-DIP Module (600 mil), 28-EDIP
• Organization: 32 K x 8
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.5 V
• Operating Current: 85 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DS1244/DS1244P
Figure 2. PHANTOM CLOCK REGISTER DEFINITION
AM/PM/12/24 MODE
Bit 7 of the hours register is defined as the 12-hour or 24-hour mode-select bit. When high, the 12-hour
mode is selected. In the 12-hour mode, bit 5 is the AM/PM bit with logic high being PM. In the 24-hour
mode, bit 5 is the second 10-hour bit (20–23 hours).
OSCILLATOR AND RESET BITS
Bits 4 and 5 of the day register are used to control the
and oscillator functions. Bit 4 controls the
RESET
(pin 1). When the
bit is set to logic 1, the
input pin is ignored. When the
RESET
RESET
RESET
RESET
bit is set to logic 0, a low input on the
pin will cause the phantom clock to abort data transfer
RESET
without changing data in the watch registers. Bit 5 controls the oscillator. When set to logic 1, the
oscillator is off. When set to logic 0, the oscillator turns on and the watch becomes operational. These
bits are shipped from the factory set to a logic 1.
ZERO BITS
Registers 1, 2, 3, 4, 5, and 6 contain one or more bits that always read logic 0. When writing these
locations, either a logic 1 or 0 is acceptable.
7 of 19