AT25080B-SSHL-T Atmel, AT25080B-SSHL-T Datasheet - Page 2

• Manufacturer Part Number: AT25080B-SSHL-T
• Description: IC EEPROM 8KBIT 20MHZ 8SOIC
• Manufacturer: Atmel

Specifications of AT25080B-SSHL-T

• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Memory Size: 8K (1K x 8)
• Speed: 5MHz, 10MHz, 20MHz
• Interface: SPI, 3-Wire Serial
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (3.9mm Width)
• Density: 8Kb
• Interface Type: Serial (SPI)
• Organization: 1Kx8
• Access Time (max): 80ns
• Frequency (max): 5MHz
• Write Protection: Yes
• Data Retention: 100Year
• Operating Supply Voltage (typ): 2.5/3.3/5V
• Operating Temp Range: -40C to 85C
• Supply Current: 10mA
• Operating Supply Voltage (min): 1.8V
• Operating Supply Voltage (max): 5.5V
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 8
• Package Type: SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1.
2
Block write protection is enabled by programming the status register with one of four blocks of write protection.
Separate program enable and program disable instructions are provided for additional data protection. Hardware
data protection is provided via the WP pin to protect against inadvertent write attempts to the status register. The
HOLD pin may be used to suspend any serial communication without resetting the serial sequence.
Absolute Maximum Ratings*
Figure 1-1.
Operating Temperature ............................–55C to +125C
Storage Temperature ...............................–65C to +150C
Voltage on Any Pin
with Respect to Ground..............................–1.0V to +7.0V
Maximum Operating Voltage.................................... 6.25V
DC Output Current ................................................. 5.0 mA
AT25080B/160B
Block Diagram
*NOTICE:
Stresses beyond those listed under
“Absolute Maximum Ratings” may cause
permanent damage to the device. This is a
stress rating only and functional operation
of the device at these or any other
conditions beyond those indicated in the
operational sections of this specification is
not implied. Exposure to absolute maximum
rating conditions for extended periods may
affect device reliability.
5228D–SEEPR–4/10