EV-ADF4153SD1Z Analog Devices, EV-ADF4153SD1Z Datasheet - Page 11

• Manufacturer Part Number: EV-ADF4153SD1Z
• Description: Clock & Timer Development Tools Evaluation Board I.C.
• Manufacturer: Analog Devices
• Type: PLL Synthesizers / Multipliers / Dividersr

Specifications of EV-ADF4153SD1Z

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: ADF4153
• Frequency: 4 GHz
• Operating Supply Voltage: 6 V to 12 V
• Operating Supply Current: 20 mA
• Factory Pack Quantity: 1
• For Use With: EVAL-SDP-CS1Z

Evaluation Board User Guide
The Main Controls tab controls the PLL settings (see Figure 18).
Use the Reference Frequency text box to set the correct refer-
ence frequency and the reference frequency divider. The default
reference on the software window is at 10 MHz; it must be
changed to 25 MHz if the on-board reference oscillator is used.
Use the RF Settings section to control the output frequency.
You can type the desired output frequency in the RF VCO
Output Frequency text box (in megahertz).
Figure 18. Software Front Panel Display—Main Controls
Rev. A | Page 11 of 24
In the Registers tab, you can manually input the desired value
to be written to the registers.
In the Sweep and Hop tab, you can make the device sweep a
range of frequencies or hop between two set frequencies.
In the Latches/Registers section at the bottom of the window,
the values to be written to each register are displayed. If the
background on the text box is green, the value displayed is
different from the value actually on the device. Click Write Rx
(where x = 0 to 3) to write that value to the device.
UG-167