W5100E01-AVR WIZnet, W5100E01-AVR Datasheet - Page 20

• Manufacturer Part Number: W5100E01-AVR
• Description: Development Boards & Kits - AVR W5100 EVAL BOARD BASED ON AVR
• Manufacturer: WIZnet

Specifications of W5100E01-AVR

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: ATMEGA128
• Core: AVR8
• Interface Type: LAN, RS-232
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 bit

Available test application of each W5100 channel is shown as <Table 2-6>
D : Display Config
0 : 1
1 : 2
2 : 3
3 : 4
F : Factory Reset
E : Exit
No Use
DHCP Client
TCP Loopback Server
TCP Loopback Client
Loopback UDP
Web Server
st
nd
rd
th
Application Type
Channel
Channel
Channel
Channel
Menu
© Copyright 2007 WIZnet Co., Inc. All rights reserved.
<Table 2-6 : W5100 Channel Application Type>
Displays current set up Test Application type of each W5100 channel
Sets up test application type at W5100 No. “0” channel
<Warning> As developing EVB B/D, DHCP Client application setup is
possible only at no. “0” channel.
Sets up test application type at W5100 no. “1” channel
Sets up test application type at W5100 no. “2” channel
Sets up test application type at W5100 no. “3” channel
Initialize into original setup status. Refer to <Table 2-4>
Exits “Channel Config”
<Table 2-5 : Menu of Channel Config>
<Fig 2.10 : Menu of Channel Config>
Not used
Receiving Network Information of EVB B/D from DHCP Server
dynamically
<Warning> If DHCP Server does not exist in LAN, it sets back to
default value after certain amount of time
TCP Server Test Program
<Warning> EVB B/D : TCP Server, AX1 : TCP Client
TCP Client Test Program
<Warning> EVB B/D : TCP Client, AX1 : TCP Server
UDP Test Program
Web Server Test Program
Description
Description
10