KIT912H634EVME Freescale Semiconductor, KIT912H634EVME Datasheet - Page 7

• Manufacturer Part Number: KIT912H634EVME
• Description: Development Boards & Kits - S08 / S12 DUAL LOW&HIDE SWITCH EVB
• Manufacturer: Freescale Semiconductor

Specifications of KIT912H634EVME

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: MM912H634, MM912G634
• Core: S12
• Interface Type: LIN, USB
• Operating Supply Voltage: 8 V to 18 V
• Description/function: Gives the user capability to easily evaluate most features provided by the MM912H634 - Integrated Dual Low Side, and Dual High Side Switch with Embedded MCU and LIN Transceiver for Relay Drivers

5
5.1
Figure 2
Freescale Semiconductor
1. Plug the USB cable into the connector J101, and connect the other end of the cable to the PC or notebook. A basic jumper
2. Connect a laboratory power supply via banana connectors to the board, using J2 (V_S supply) and J3 (GND).
Setup and connections for the KIT912H634EVME are straightforward.
The KIT912H634EVME requires a connection to the power supply and a connection to the PC or notebook via the USB cable.
To set up the board, perform the following steps:
configuration is required to be able to use the KIT912H634EVME. See
index of jumper settings.
Alternatively, the LIN connector can be used for powering the board. The supply voltage has to be in the range of 8.0 to
18 V. When power is applied to the KIT912H634EVME, the green power-on LEDs D6 (+5.0 V), D7 (supply), and D8
(+2.5 V) are lit when power is present and the corresponding jumpers JP4, JP8, JP9 are closed.
depicts a complete setup.
Setup Guide
Hardware Setup
JP14
JP15
JP1
JP2
#
Supplying of the device logic (VDDX regulator) and hall sensor supply regulator enabled
Supplying of the device logic (VDDX regulator) and hall sensor supply regulator disabled
Supplying of the HS drivers enabled
Supplying of the HS drivers disabled
BDM signal from TBDML interface enabled
BDM signal from TBDML interface disabled, external BDM interface can be used
(connected to J4)
RST signal from TBDML interface enabled
RST signal from TBDML interface disabled, external BDM interface can be used
(connected to J4)
Table 1. KIT912H634EVMEJumper Options for Basic Functionality
KIT912H634EVME User’s Guide, Rev 1.0
Function
Table 1
for details.
Table 2
provides a complete
Connections
closed
closed
closed
closed
open
open
open
open
Setup Guide
7