MIKROE-504 mikroElektronika, MIKROE-504 Datasheet - Page 18
![no-image](/images/no-image-200.jpg)
MIKROE-504
Manufacturer Part Number
MIKROE-504
Description
Development Boards & Kits - PIC / DSPIC BIGDSPIC6 DEVELOPMENT SYSTEM
Manufacturer
mikroElektronika
Datasheet
1.MIKROE-504.pdf
(28 pages)
Specifications of MIKROE-504
Rohs
yes
Product
Development Kits
Core
dsPIC
Interface Type
ICD, IDC10, RS-232, USB
Operating Supply Voltage
5 V, 9 V to 32 V
Data Bus Width
16 bit
Description/function
Development Board Only, Touch Screen, Pencil, LCD, Serial Cable, GLCD not included
Dimensions
265 mm x 220 mm
For Use With
dsPIC30F
18
BIGdsPIC6 Development System
The USB UART module is used to connect the microcontroller provided on the development system to external USB devices. The
USB UART module features the FT232RL circuit providing an interface between the USB device and serial UART module integrated
into the microcontroller. In order to establish connection between the microcontroller and USB UART module, it is necessary to set
switches 1 (RF2) and 2 (RF3) on the DIP switch SW12 to the ON position.
When connecting a UART device and the microcontroller, it is necessary to cross connect data send and data receive lines. In other
words, the UART’s RX pin should be connected to the microcontroller’s TX pin, while the TX pin should be connected to the RX pin.
It is not possible to directly connect UART’s and microcontroller’s TX lines since the microcontroller wouldn’t be able to receive nor
send data.
USB connector of B type
: USB UART module
: USB connector and microcontroller connection schematic
MikroElektronika