MIKROE-504 mikroElektronika, MIKROE-504 Datasheet - Page 20

• Manufacturer Part Number: MIKROE-504
• Description: Development Boards & Kits - PIC / DSPIC BIGDSPIC6 DEVELOPMENT SYSTEM
• Manufacturer: mikroElektronika

Specifications of MIKROE-504

• Rohs: yes
• Product: Development Kits
• Core: dsPIC
• Interface Type: ICD, IDC10, RS-232, USB
• Operating Supply Voltage: 5 V, 9 V to 32 V
• Data Bus Width: 16 bit
• Description/function: Development Board Only, Touch Screen, Pencil, LCD, Serial Cable, GLCD not included
• Dimensions: 265 mm x 220 mm
• For Use With: dsPIC30F

20
15.0. LEDs
resistor. A common LED voltage is approximately 2.5V, while the current varies from 1 to 20mA depending on the type of LED. The
BIGdsPIC6 uses LEDs with current I=1mA.
There are 77 LEDs on the BIGdsPIC6 development system which visually indicate the state of each microcontroller I/O pin. An
active LED indicates that a logic one (1) is present on the pin. In order to enable the pin state to be shown, it is necessary to select
appropriate port (PORTA, PORTB, PORTC, PORTD, PORTE, PORTF, PORTG or PORTG/E) using the DIP switch SW11.
MikroElektronika
: LEDs and port PORTB connection schematic
: LEDs
Microcontroller
BIGdsPIC6 Development System
SMD resistor limiting current
Notch indicating the SMD
LED cathode