EVB-PIC24 WIZnet, EVB-PIC24 Datasheet - Page 24

• Manufacturer Part Number: EVB-PIC24
• Description: Development Boards & Kits - PIC / DSPIC W3150A+EVAL BOARD BASED ON PIC24
• Manufacturer: WIZnet

Specifications of EVB-PIC24

• Rohs: yes
• Product: Development Kits
• Interface Type: RS-232
• Data Bus Width: 16 bit
• Dimensions: 50 mm x 40 mm

After EVB B/D setup is over, loop back desired data with IP Address and UDP Source Port of EVB B/D using
menu or Icon related to UDP.
Refer to “AX1 Manual Vx.x.pdf”.
<Fig 2.15: Loopback UDP Test>
2.3.2.5.
Web Server
Web Server Application sends and receives web pages and EVB B/D control data etc. through HTTP
Channel connected with web browser. For Web Server testing, set up any channel of iinChip™ as “Web
Server” Application Type using [Manager>>Channel Config] Menu of EVB B/D.
When setting up “Web Server” Application Type of EVB B/D, set HTTP port as any value. Here, it‟s set to 80,
the default value. Refer to
Chapter
2.4.1.2.
After setup for EVB B/D, run Web browser in the Test PC, type the URL(http://192.168.0.2/) of the EVB B/D
in the address field and connect to EVB B/D.
<Fig 2.16: Web Server Test>
If the web browser successfully connected to HTTP port of EVB B/D, the Web Page of <Fig 2.20> can be
viewed. In case Web Page of <Fig 2.20> is not shown, refresh the screen using the “Refresh” function of the
web browser.
14
© Copyright 2006 WIZnet Co., Inc. All rights reserved.