MAX7315EVKIT+ Maxim Integrated, MAX7315EVKIT+ Datasheet - Page 2

• Manufacturer Part Number: MAX7315EVKIT+
• Description: Interface Development Tools Evaluation Kit for the MAX7315
• Manufacturer: Maxim Integrated
• Series: MAX7315r

Specifications of MAX7315EVKIT+

• Operating Supply Voltage: 2 V to 3.6 V

• 5VDC, 1A power supply
• MAX7315 EV system
• A user-supplied Windows 98SE/2000/XP PC with a
Note: In the following sections, software-related items are
identified by bolding. Text in bold refers to items directly
from the EV kit software. Text in bold and underlined
refers to items from the Windows 98SE/2000/XP operating
system.
The MAX7315 EV kit is fully assembled and tested.
Follow the steps below to verify board operation. Do not
turn on the power supply until all connections are
completed.
1) Visit the Maxim website (www.maxim-ic.com/evkit-
2) Install the MAX7315 evaluation software on your
3) On the CMAXQUSB board, ensure the shunt of JU1
4) Enable the I
5) For the MAX7315 EV kit, make sure the shunts of all
MAX7315 Evaluation Kit/Evaluation System
2
MAX7315EVKIT+
CMAXQUSB+
spare USB port
software) to download the most recent version of
the EV kit software, 7315Rxx.ZIP.
computer by running the INSTALL.EXE program.
The program files are copied and icons are created
in the Windows Start menu.
is in the 3.3V or 2.5V position.
board by setting the DIP switch SW1 to the ON
position.
jumpers are in the following default positions
(Table 1).
_______________________________________________________________________________________
PART
MAX7315 EV kit
Maxim CMAXQUSB interface board
(USB cable included)
Component List (continued)
2
C pullup resistors on the CMAXQUSB
QTY
Recommended Equipment
1
1
MAX7315 EV kit
Serial-interface board
MAX7315 EV System
DESCRIPTION
Quick Start
Procedure
6) Carefully connect the boards by aligning the
7) Connect the 5VDC power supply between the
8) Turn on the 5VDC power supply.
9) Connect the USB cable from the PC to the
10) Follow the directions of the Add New Hardware
Table 1. MAX7315 EV Kit Default Jumper
Positions
JU1, JU2, JU5
JU8–JU13
JUMPER
JU3, JU4
MAX7315 EV kit’s 20-pin connector with the 20-pin
connector of the CMAXQUSB board.
MAX7315 EV kit’s VLED and GND pads.
CMAXQUSB board. A Building Driver Database
window pops up in addition to a New Hardware
Found message. If you do not see a window that is
similar to the one described above after 30 sec-
onds,
CMAXQUSB and reconnect it. Administrator privi-
leges are required to install the USB device driver on
Windows 2000/XP. Refer to the TROUBLESHOOT-
ING_USB.PDF document included with the software if
you have any problems during this step.
Wizard to install the USB device driver. Choose the
TROUBLESHOOTING_
JU6
JU7
MAX7315.EXE
INSTALL.EXE
FTD2XX.INF
UNINST.INI
USB.PDF
FILE
remove
POSITION
SHUNT
1-4
2-3
1-2
2-3
1-2
the
MAX7315 EV Kit Files
I
P6, P7 set as input ports
INT/O8 uses on-board LED
indicator
CMAXQUSB provides the V+
power supply
P0–P5 uses on-board
input/output circuitry
2
C slave address is 0xC6
Installs the EV kit files on your
computer
Application program
USB device driver file
Uninstalls the EV kit
software
USB driver installation help
file
USB
DESCRIPTION
DESCRIPTION
cable
from
the