ZFSM-101-2 CEL, ZFSM-101-2 Datasheet - Page 15

• Manufacturer Part Number: ZFSM-101-2
• Description: Zigbee / 802.15.4 Modules 2.4GHz 100mW 3.3Volt Freescale MC13202
• Manufacturer: CEL

Specifications of ZFSM-101-2

• Rohs: yes
• Frequency Band: 2.4 GHz
• Line Of Sight Range: 4000 ft
• Data Rate: 250 kbps
• Sensitivity: - 91 dBm
• Operating Supply Voltage: 2.8 V to 3.6 V
• Supply Current Transmitting: 165 mA
• Supply Current Receiving: 50 mA
• Output Power: 20 dBm
• Antenna Connector Type: PCB
• Maximum Operating Temperature: + 85 C
• Dimensions: 36 mm x 25 mm
• Interface Type: UART
• Minimum Operating Temperature: - 40 C

FreeStar ZFSM-101-2
PROCESSING
(Continued)
Hand Soldering
Hand soldering is possible. When using a soldering iron, follow IPC recommendations (reference document IPC-7711)
Rework
The module can be unsoldered from the host board. Use of a hot air rework tool should be programmable and the solder
joint and module should not exceed the maximum peak reflow temperature of 250 ºC.
Caution
If temperature ramps exceed the reflow temperature profile, module and component damage may occur due to thermal
shock. Avoid overheating.
Warning
Never attempt a rework on the module itself, (e.g. replacing individual components). Such actions will
terminate warranty coverage.
Additional Grounding
Attempts to improve module or system grounding by soldering braids, wires, or cables onto the module RF shield cover is
done at the customer's own risk. The numerous ground pins at the module perimeter should be sufficient for optimum
immunity to external RF interference.
SHIPMENT, HANDLING, AND STORAGE
Shipment
The modules are delivered in trays of 50.
Handling
The modules are designed and packaged to be processed in an automated assembly line.
Warning
The modules contain highly sensitive electronic circuitry. Handling without proper ESD
protection may destroy or damage the module permanently.
Warning
The modules are moisture-sensitive devices. Appropriate handling instructions and precautions are summarized in J-STD-033.
Read carefully to prevent permanent damage due to moisture intake.
Moisture Sensitivity Level (MSL)
MSL 3, per J-STD-033
Storage
Storage/shelf life in sealed bags is 12 months at <40°C and <90% relative humidity.
QUALITy
CEL modules offer the highest quality at competitive prices. Our modules are manufactured in compliance with the IPC-A-610
specification, Class II. Our modules go through JESD22 qualification processes which includes high temperature operating life
tests, mechanical shock, temperature cycling, humidity and reflow testing. CEL modules are 100% factory tested for RF and
DC performance. In addition, every production lot is sample tested for compliance with CEL’s high quality and performance
standards.
CEL builds quality into our products giving our customers the confidence when integrating our products into their systems.
Page 15