TLM-1550MP/Z2/T Tadiran Batteries, TLM-1550MP/Z2/T Datasheet - Page 2

• Manufacturer Part Number: TLM-1550MP/Z2/T
• Description: BATT LITH AA 3.6V MP CYL W/TAB
• Manufacturer: Tadiran Batteries
• Series: TLM1550r

Specifications of TLM-1550MP/Z2/T

• Battery Cell Size: AA - Tab
• Voltage - Rated: 3.6V
• Capacity: 800mAh
• Size / Dimension: 0.58" Dia x 2.01" H (14.7mm x 51.1mm)
• Termination Style: Button Top (Extending)
• Rechargeability: No
• Discharge Current: 4A
• Operating Temperature: -40°C ~ 85°C
• Weight: 0.71 oz (20.13g)
• Lead Free Status / RoHS Status: Lead free / RoHS compliant by exemption
• Other names: 439-1043; TLM-1550MP

B
TQM
TQM
Q u a l i t y
F i r s t
IMPORTANT NOTE-2: The above levels are not anticipated under normal consumer
use conditions.
IMPORTANT NOTE-1: The cell/battery should not be opened or exposed to water
and heat because exposure to the following ingredients contained within the battery
could be harmful under some circumstances.
SECTION 3- HAZARD IDENTIFICATION
The cells described in this MSDS is sealed unit, which are not hazardous when used
according to the recommendations of the manufacturer and provide that the integrity
the cells is maintained
Emergency overview: Do not short circuit, crush, immerse in water, charge, force
discharge or expose to temperature above the declared operation temperature range of
the product.
Potential health effects: Under normal conditions of use, the materials contained in
the cells are not exposed to the outside, provided the battery integrity is maintained
and seal remained intact. The risk of exposure to the internal ingredients occurs only
in case of physical (mechanical) thermal or electrical abuses.
Acute exposure- electrolyte may irritate skin and eyes.
SECTION 4 – FIRST AID MEASURES
General introduction- the chemical ingredients are contained in a hermitically sealed
cans. Thus, adequate hazard warnings are included on cell and on the package.
Practically, there is no potential for exposure to these ingredients unless the cell leaks,
or opened when exposed to high temperature, opened mechanically or electrically
abused.
On contact with eyes – Not anticipated under normal use. If cell is leaking and
material contacts eyes, flush with copious amounts of clear, tepid water for at least 15
minutes (remove contact lenses if easily possible). Get medical attention at once.
On contact with skin - Not anticipated under normal use. If cell is leaking and
material contacts the skin, flush immediately with copious amounts of clear, tepid
water and wash affected area with soap and water. In severe cases obtain medical
attention.
If inhaled - Not anticipated under normal use. If cell is leaking, remove to fresh air.
Avoid inhaling any vented gases. If irritation persists, obtain medial attention.
On ingestion - Not anticipated. If cell is leaking, rinse mouth and surrounding area
with clear, tepid water for at least 15 minutes. Give plenty of water to drink. Obtain
medical attention.
Further Treatment- All cases of eye contamination, persistent skin irritation,
breathing of vapors and swallowed internal ingredients, should be seen by a Doctor.
SECTION 5- FIRE FIGHTING MEASURES
Extinguishing Media- Dry chemical type extinguishers, or CO
extinguishers or
2
water extinguishers can be used effectively for burning cells or batteries. Water-based
foam or copious quantities of water can be used to cool down burning cell.
2/8
TLM-01, rev B