TLM-1550MP/Z2/T Tadiran Batteries, TLM-1550MP/Z2/T Datasheet - Page 3

• Manufacturer Part Number: TLM-1550MP/Z2/T
• Description: BATT LITH AA 3.6V MP CYL W/TAB
• Manufacturer: Tadiran Batteries
• Series: TLM1550r

Specifications of TLM-1550MP/Z2/T

• Battery Cell Size: AA - Tab
• Voltage - Rated: 3.6V
• Capacity: 800mAh
• Size / Dimension: 0.58" Dia x 2.01" H (14.7mm x 51.1mm)
• Termination Style: Button Top (Extending)
• Rechargeability: No
• Discharge Current: 4A
• Operating Temperature: -40°C ~ 85°C
• Weight: 0.71 oz (20.13g)
• Lead Free Status / RoHS Status: Lead free / RoHS compliant by exemption
• Other names: 439-1043; TLM-1550MP

B
TQM
TQM
Q u a l i t y
F i r s t
Fire Fighting Procedures- If cells are involved in the fire, one should wear self-
contained breathing apparatus (SCBA) to avoid breathing of irritant fumes. Full
protective clothing is necessary. During water application, caution should be
exercised as burning pieces of flammable particles may be ejected from the fire.
Evacuate all persons from immediate area of fire. DO NOT re-enter the area until it
has been thoroughly ventilated (purged) of the fire vapors and the extinguishing agent.
Unusual Fire and Explosion Hazard- If cells or batteries are exposed to excessive
heat or fire they may flame or leak of potentially hazardous decomposition products.
heat, charging or over-discharge they may produce hazardous decomposition
products. Burning cells emit acrid smoke, irritating fumes, and toxic fumes of
hazardous oxides of carbons, hydrofluoric acid and other toxic by-products (e.g.,
lithium oxide, aluminum, aluminum oxide, cobalt oxide, copper, copper oxide,
phosphorus pentafluoride, etc.).
Damaged or opened cells/batteries or batteries can result in rapid heating and release
of flammable vapors.
SECTION 6- ACCIDENTAL RELEASE MEASURES
In case of electrolyte leakage from a cell, the leaked materials should be removed
using protective glass and protective gloves. Do not inhale the gas as much as
possible. In addition, avoid touching the material as much as possible. Remove
personnel from area until fumes dissipate. If skin has come into contact with the
electrolyte, it should be washed thoroughly with water.
Damaged cells that are not hot or burning should be placed in a sealed plastic bag or
container. The removal of the cells should be dealt carefully using protective glasses
and protective gloves.
SECTION 7- HANDLING AND STORAGE
Cell Charging:
not
The TLM cells are primary cells and, as such, are
designed to be recharged from
external power source. Connecting to any other power supply can result in fire or
explosion.
Cell Disassembly
The cells should never be disassembled, or mechanically abused.
Should a cell unintentionally crushed or opened, thus releasing its content, rubber
gloves should be used to handle all cell components. The inhalation of any vapor that
may be emitted should be avoided.
In event of inhalation, eye and skin exposure to the electrolyte, refer to Section 4
“First Aid Measures”.
Short Circuiting
As with any cell, short circuit causes heating. In addition, short circuit reduces the life
of the cell and can lead to ignition of surrounding materials. Physical contact with to
short-circuited battery can cause skin burns.
3/8
TLM-01, rev B