SJ-3518FR (BLACK) 3/4" 3M, SJ-3518FR (BLACK) 3/4" Datasheet - Page 5

• Manufacturer Part Number: SJ-3518FR (BLACK) 3/4"
• Description: LOOP PRESS BACK 3/4"X50'BLK/50FT
• Manufacturer: 3M
• Series: Scotchmate™r

Specifications of SJ-3518FR (BLACK) 3/4"

• Wire/cable Tie Type: Hook and Loop - Loop Strip
• Bundle Diameter: Variable
• Length: 50.0' (15.2m)
• Width: 0.750" (19.1mm)
• Mounting Type: Adhesive
• Color: Black
• Features: -
• Tensile Strength: -
• Other names: Q1414397; SJ3518FRBLACK3/4"

3M
SJ3519FR and SJ3518FR
Nylon Flame Resistant Hook and Loop
Attachment
Techniques
Available Sizes
™
Scotchmate
(a)
The following information is intended to assist the designer considering the use of
adhesively coated 3M™ Scotchmate™ Reclosable Fasteners. Product performance
depends upon a number of factors, including the fastener selected, the conditions in which
the fastener is applied and the time and environmental conditions in which it is expected to
perform. Because many of these factors are uniquely within the user’s knowledge and
control, it is required that the user evaluate 3M products to determine whether it is fit for a
particular purpose and suitable for the user’s substrates, method of application and desired
end use.
The three most important techniques for attaching Scotchmate reclosable fasteners
SJ3518FR and SJ3519FR to various substrates are summarized below. For complete
details on techniques and options for attaching Scotchmate reclosable fasteners please see
the technical bulletin “Attachment of 3M™ Scotchmate™ and Dual Lock™ Reclosable
Fasteners” (70-0709-3929-6).
Design Considerations: As a general rule, four square inches of fastener area per pound of
static load to be supported is suggested as a starting point for evaluation. More or less area
may be needed depending on specific conditions or end use applications.
Rounding the corners, recessing the product into the substrate and providing raised edges
around the reclosable fastener can reduce the possibility of edge lifting, and improve the
overall appearance of the fastener on the finished product. Mechanically securing the
corners of the reclosable fastener can also reduce the possibility of edge lifting, but may
reduce the closure performance.
a) Scotchmate reclosable fasteners SJ3518FR or SJ3519FR products are available on standard 3" diameter cores. Scotchmate
b) Other configurations may be possible as a special order.
c) 1" x 3" of pre-mated Scotchmate reclosable fasteners SJ3518FR and SJ3519FR cut pieces are available in beige with
Fabricated Forms
1-1/2" (38.1 mm)
selvedge edge and extended liner on one side. 3M™ Scotchmate™ Reclosable Fasteners can be fabricated in many custom
shapes and sizes to fit your product design and manufacturing process. Contact your local 3M authorized converter or 3M
representative for additional options, configurations and ordering information.
reclosable fasteners SJ3518FR and SJ3519FR are available up to 4" wide as a special order. An additional 1/4" should be
added to the product width to account for the side shields supplied with the product. The diameter of the side shield is 17.5
inches. Contact your 3M authorized distributor or 3M representative for details on supplying special sizes.
5/8" (15.9 mm)
3/4" (19 mm)
1" (25.4 mm)
2" (50.8 mm)
inch ± 1/16
(mm) ± 1.6
Width
TM
Reclosable Fasteners
(a)
(c)
50 yds. (45.7 meters)
50 yds. (45.7 meters)
50 yds. (45.7 meters)
50 yds. (45.7 meters)
50 yds. (45.7 meters)
3M™ Scotchmate™ Reclosable Fasteners
Yards (Meters)
Roll Length
SJ3518FR (Loop) and SJ3519FR (Hook)
- 5 -
(with side shields
and grommets)
Roll Weight
Cut Pieces
(Kilograms)
1.6 (0.73)
1.9 (0.86)
2.4 (1.1)
3.4 (1.5)
4.4 (2.0)
Pounds
Two Edges
Two Edges
One Edge
One Edge
One Edge
Selvedge
Edge
(b)
Two Edges
Two Edges
Extended
One Edge
One Edge
One Edge
Liner
(b)