SJ-3518FR (BLACK) 3/4" 3M, SJ-3518FR (BLACK) 3/4" Datasheet - Page 7

• Manufacturer Part Number: SJ-3518FR (BLACK) 3/4"
• Description: LOOP PRESS BACK 3/4"X50'BLK/50FT
• Manufacturer: 3M
• Series: Scotchmate™r

Specifications of SJ-3518FR (BLACK) 3/4"

• Wire/cable Tie Type: Hook and Loop - Loop Strip
• Bundle Diameter: Variable
• Length: 50.0' (15.2m)
• Width: 0.750" (19.1mm)
• Mounting Type: Adhesive
• Color: Black
• Features: -
• Tensile Strength: -
• Other names: Q1414397; SJ3518FRBLACK3/4"

Attachment
Techniques
(continued)
Application Ideas
3M
SJ3519FR and SJ3518FR
Nylon Flame Resistant Hook and Loop
™
Scotchmate
2) Heat (Press) Bonding: 3M™ Scotchmate™ Reclosable Fasteners SJ3518FR (hook) and
SJ3519FR (loop) can be attached to many fabric and foam articles by press bonding. The
fastener is initially adhered to the article using finger pressure. Bond strength is increased
by applying heat and pressure through the substrate to the adhesive side of the fastener for
given pressure, times and heating period. For properly chosen press bonding conditions the
product can be used immediately after cooling, usually a matter of minutes. Once applied
these fasteners should not be washed or dry cleaned. Product performance will depend
upon the nature of the fabric or foam and other conditions within any specific application.
For this reason it is essential that the user evaluate the product to determine if it is fit for a
particular purpose and suitable for the user’s method of application.
3) Mechanical Attachment: Scotchmate reclosable fasteners SJ3518FR and SJ3519FR
may also be mechanically attached to difficult to adhere to surfaces such as textured
plastics and wood by using staples, screws or rivets. The head of the mechanical fastener
should be flat and large enough to resist pull through when the fastener is disengaged.
The head of the fastener should also be recessed as much as possible below the surface of
the hook or loop to prevent interference with (dis)engagement properties.
The use of resin coated chisel divergent staples appear to provide excellent attachment to
thick sections of soft and hardwood surfaces.
Scotchmate reclosable fasteners SJ3518FR and SJ3519FR can provide a firm adhesive
bond to a wide variety of surfaces, including, but not limited to those listed below.
Because product performance will depend on actual conditions within any specific
application, it is essential that the user evaluate the 3M product to determine whether it is
fit for a particular material purpose and suitable for the user’s method of application.
Scotchmate reclosable fasteners SJ3518FR and SJ3519FR has shown to be useful for:
Paper
Glass
Fabrics
Not recommended for attaching to flexible vinyl or plasticized plastics.
Anti-scratch surface
Panels in Rail Vehicles
Insulation Blanket Closures
TM
Typical Press Bonding Conditions:
Bonding Temperature: 250 to 425°F (121 to 218°C)
Bonding Pressure: 30 to 100 psi (207 to 690 kPa)
Bonding Time: 3 to 30 seconds.
Reclosable Fasteners
Cardboard
Sealed Wood
Bare and Painted Metal
- 7 -
Vibration and sound dampening control
Airline Interiors and Seating
Electronic Cover Plates
Acrylic
Polycarbonate
Polyethylene
Plastics
Polypropylene
Polystyrene
Rigid Vinyl