DS2777G+ Maxim Integrated Products, DS2777G+ Datasheet - Page 27

• Manufacturer Part Number: DS2777G+
• Description: IC FUEL GAUGE LI+ 2CELL 14-TDFN
• Manufacturer: Maxim Integrated Products

Specifications of DS2777G+

• Function: Fuel, Gas Gauge/Monitor
• Battery Type: Lithium-Ion (Li-Ion), Lithium-Polymer (Li-Pol)
• Voltage - Supply: 4 V ~ 9.2 V
• Operating Temperature: -20°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 14-TDFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

All Control register bits are read and write accessible. The Control register is recalled from parameter EEPROM
memory at power-up. Register bit values can be modified in shadow RAM after power-up. Power-up default values
are saved by using the Copy Data command.
Bit 7: Negative Blanking Enable (NBEN). A value of 1 enables blanking of negative current values up to 25µV. A
value of 0 disables blanking of negative currents. The power-up default of NBEN = 0.
Bit 6: Undervoltage Enable (UVEN). A value of 1 allows the DS2775–DS2778 to enter sleep mode when the aver-
age of the voltages on V
disables transitions to sleep mode during an undervoltage condition.
Bit 5: Power-Mode Enable (PMOD). A value of 1 allows the DS2775–DS2778 to enter sleep mode when DQ is low
for t
Bit 4: Read Net Address Op Code (RNAOP). A value of 0 selects 33h as the op code value for the Read Net
Address command. A value of 1 selects 39h as the op code value for the Read Net Address command.
Bit 3 and 2: Undervoltage Threshold (VUV[1:0]). Sets the voltage at which the part detects an undervoltage condi-
tion according to Table 4.
Bit 1: Power-Switch PIO Enable (PSPIO). A value of 1 enables the PIO pin as a power-switch input. A value of 0
disables the power-switch input function on PIO pin. This control is independent of the PSDQ state.
Bit 0: Power-Switch DQ Enable (PSDQ). A value of 1 enables the DQ pin as a power-switch input. A value of 0 dis-
ables the power-switch input function on DQ pin. This control is independent of the PSPIO state. This bit has no
effect in the DS2777/DS2778.
Table 4. Undervoltage Threshold
SLEEP
NBEN
BIT 7
Protector and Optional SHA-1 Authentication
. A value of 0 disables DQ-related transitions to sleep mode.
2-Cell, Stand-Alone, Li+ Fuel-Gauge IC with
______________________________________________________________________________________
UVEN
BIT 6
VUV[1:0] BIT FIELD
IN1
0 0
0 1
1 0
1 1
and V
PMOD
BIT 5
IN2
is less than V
RNAOP
BIT 4
UV
and DQ is stable at either logic level for t
BIT 3
VUV1
Control Register Format
BIT 2
VUV0
V
UV
2.00
2.30
2.45
2.60
Control Register (60h)
(V)
PSPIO
BIT 1
SLEEP
. A value of 0
PSDQ
BIT 0
27