MAX1494CCJ+T Maxim Integrated Products, MAX1494CCJ+T Datasheet - Page 27
![IC ADC W/LCD DRIVER 32-TQFP](/photos/6/50/65051/32-tqfp_21-0110b_sml.jpg)
MAX1494CCJ+T
Manufacturer Part Number
MAX1494CCJ+T
Description
IC ADC W/LCD DRIVER 32-TQFP
Manufacturer
Maxim Integrated Products
Datasheet
1.MAX1494CCJ.pdf
(34 pages)
Specifications of MAX1494CCJ+T
Display Type
LCD
Configuration
7 Segment + 2 Annunciators
Interface
Serial
Digits Or Characters
A/D 4.5 Digits
Current - Supply
960µA
Voltage - Supply
2.7 V ~ 5.25 V
Operating Temperature
0°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
32-LQFP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Default values: 0000h
The LCD data register is a 16-bit read/write register.
This register updates from the ADC result register 1, the
PEAK register, or from the serial interface by selecting
SPI/ADC bit, PEAK bit, and HOLD bit in the control reg-
ister (Table 6). The data is represented in two’s comple-
ment format.
Default values: 00h
The ADC result-register 2 is an 8-bit read-only register.
This register stores the 4 LSBs of the ADC result. Use
Default values: 0000h
The peak data register is a 16-bit read-only register.
Set the PEAK bit to 1 to enable the PEAK function. This
register stores the peak value of the ADC conversion
result. First, the current ADC result is saved to the
PEAK register. Then, the new ADC conversion result is
compared to this value. If the new value is larger than
the value in the peak register, the MAX1492/MAX1494
save the new value to the peak register. If the new
value is less than the value in the peak register,
the value in the peak register remains unchanged. Set
LCD Data Register (Read/Write):
PEAK Register (Read Only):
ADC Result-Register 2 (Read Only):
MSB
MSB
MSB
D15
D15
D3
D14
D14
D13
D13
______________________________________________________________________________________
D2
D12
D12
3.5- and 4.5-Digit, Single-Chip ADCs
D11
D11
D1
D10
D10
D9
D9
LSB
D0
D8
D8
For the MAX1494, the data is 16-bit and D15 is the MSB.
For the MAX1492, the data is 12-bit, D15 is the MSB,
and D4 is the LSB, followed by four trailing sub-bits.
the PEAK bit to 0 to clear the value in the PEAK regis-
ter. The peak function is only valid for the range of
-19,487 to +19,999 for the MAX1494 and -1217 to
+1999 for the MAX1492.
The data is represented in two’s complement format.
For the MAX1494, the data is 16-bit and D15 is the MSB.
For the MAX1492, the data is 12-bit, D15 is the MSB, and
D4 is the LSB followed by four trailing sub-bits.
this result with the result in ADC result-register 1 to form
a 20-bit two’s complement conversion result.
D7
D7
0
D6
D6
D5
D5
with LCD Drivers
(MAX1492)
(MAX1492)
0
LSB
LSB
D4
D4
D3
D3
0
D2
D2
D1
D1
(MAX1494)
(MAX1494)
0
LSB
LSB
D0
D0
27