MAX7306AUB+ Maxim Integrated Products, MAX7306AUB+ Datasheet - Page 6

• Manufacturer Part Number: MAX7306AUB+
• Description: IC LED DRIVER LINEAR 10-UMAX
• Manufacturer: Maxim Integrated Products
• Type: Linear (I²C Interface)r

Specifications of MAX7306AUB+

• Topology: PWM
• Number Of Outputs: 4
• Internal Driver: Yes
• Type - Primary: Backlight, LED Blinker
• Type - Secondary: White LED
• Frequency: 1MHz
• Voltage - Supply: 1.62 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 10-MSOP Exposed Pad, 10-HMSOP, 10-eMSOP
• Operating Temperature: -40°C ~ 125°C
• Current - Output / Channel: 25mA
• Internal Switch(s): No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Output: -
• Efficiency: -
• Lead Free Status / Rohs Status: Details

SMBus/I
GPIOs and LED Drivers
6
MAX7306
_______________________________________________________________________________________
10
—
—
1
2
3
4
5
6
7
8
9
PIN
MAX7307
10
—
—
1
2
3
4
5
6
7
8
9
2
C Interfaced 4-Port, Level-Translating
P3/OSCOUT
P2/OSCIN
P1/INT
NAME
GND
SDA
AD0
V
SCL
RST
V
P4
EP
DD
LA
Reset Input. RST is an active-low input, referenced to V
which can be configured to put the device in the power-up reset condition and reset the
PWM and blink timing.
Input/Output Port. P1/INT is configurable as an open-drain I/O or as a transition detection
interrupt output.
Ground
Input/Output Port. P2/OSCIN is configurable as a push-pull I/O, open-drain I/O, or as the
PWM/blink/timing oscillator input.
Input/Output Port. P3/OSCOUT is configurable as a push-pull I/O, open-drain I/O, or as
the PWM/blink/timing oscillator output.
Input/Output Port. P4 is configurable as a push-pull I/O or an open-drain I/O.
Port Supply for P1–P4. Connect V
V
Address Input. Sets the device slave address. Connect to GND, V
provide four address combinations.
Positive Supply Voltage. Bypass V
Serial-Data I/O
Serial-Clock Input
Exposed Pad (µMAX only). Connect to GND.
LA
to GND with a 0.1µF capacitor.
LA
DD
to a power supply between 1.40V and 5.5V. Bypass
to GND with a 0.1µF ceramic capacitor.
FUNCTION
DD
, that clears the 2-wire interface,
Pin Description
DD
, SCL, or SDA to