LDP10IG10-A Panduit Corp, LDP10IG10-A Datasheet - Page 52

• Manufacturer Part Number: LDP10IG10-A
• Description: RACEWAY 1CHAN LG AD LGY(10=10')
• Manufacturer: Panduit Corp
• Series: Pan-Way™r

Specifications of LDP10IG10-A

• Wire Duct Type: Solid (Raceway), Single Channel
• Height: 0.860" (21.80mm)
• Length: 10.00' (3.05m)
• Width: 1.51" (38.4mm)
• Mounting Type: Adhesive
• Features: Attached Latching Lid
• Color: Gray, Light

Faceplates,
Furniture
LD Profile
Overview
Selection
Technical
Ultimate
Labeling
Twin-70
Boxes &
System
System
Office
Outlet
Guide
TG-70
Index
Quick
Cove
T130
T-70
T-45
Pole
Info
ID
&
F12
Type T-70 & Twin-70 Raceway Accessories
• T-70 and Twin-70 accessories consist of device mounting brackets, snap-on device brackets, hanging boxes, and three
T70HB3GFCI-X
sided hanging boxes used to mount NEMA standard single gang electrical outlets and or communication devices
Order number of pieces required, in multiples of Standard Package Quantity.
T70DB-X
T70HB-X
T70FSB
T70S-X
T70SDB-X
T70HB3-X
T70WR-X
Use the T70FSB with T-70 or Twin-70 Raceway
to contain 1m or more of fiber slack while
maintaining a 30mm cable bend radius.
Brackets are adjustable for slack length.
Part Number
T70DB-X
T70SDB-X
T70HB-X
T70HB3-X
T70HB3GFCI-X
T70WR-X
T70S-X
T70FSB
Device Mounting Bracket. Used to mount NEMA
standard single gang electrical outlets and
communication devices with either screw-on or
snap-on single gang faceplates. Can be used with
T-70, Twin-70, TE-70 and TG-70 Raceways.
Standard Faceplate Bracket. Used to mount NEMA
standard single gang screw-on electrical and
communication faceplates only.
Hanging Box. Used to mount NEMA standard single
gang electrical outlets and devices with either screw-
on or snap-on single gang faceplates when there are
communications cables in the raceway. For use in T-70
and Twin-70 Raceway only.
Three-sided Hanging Box. Used to mount NEMA
standard single gang electrical outlets and devices with
either screw-on or snap-on single gang faceplates
when there are communications cables in the raceway.
Box is low profile for increased channel capacity and
does not require breakout removal. For use with T-70
and Twin-70 Raceway only.
T70 GFCI Three-sided Hanging Box. Accepts single
gang U.S. GFCI (ground fault circuit interrupter)
standard electrical devices. Provides increased internal
area for connections and excess wire.
Wire Retainer. Holds wires in place during installation.
Spacer Plate. Used to mount the CBX4 Surface Mount
Box onto the T70DB-X or T70HB-X / T70HB3-X.
Fiber Spool Bracket. Each piece consists of two halves
that snap into base of T-70 or Twin-70 Raceway.
Provides method to contain one meter or more of fiber
slack and acts as a strain relief while maintaining a
minumum 30mm bend radius. Bracket separation can
be adjusted to fit the length of slack required.
Part Description
Use T70S-X Spacer Plate for
mounting the CBX4 Surface Mount
Box on T-70 or T702.
Prime items appear in BOLD.
Color
Gray
Gray
Gray
Gray
Gray
Gray
Gray
–
Pkg.
Std.
Qty.
10
10
10
10
10
10
10
1
Ctn.
Std.
Qty.
100
100
100
100
100
100
10
—