BTS133 E3064 Infineon Technologies, BTS133 E3064 Datasheet - Page 9

• Manufacturer Part Number: BTS133 E3064
• Description: IC SWITCH LOSIDE PWR N-CH TO-220
• Manufacturer: Infineon Technologies
• Series: HITFET®r
• Type: Low Sider

Specifications of BTS133 E3064

• Input Type: Non-Inverting
• Number Of Outputs: 1
• On-state Resistance: 40 mOhm
• Current - Output / Channel: 7A
• Current - Peak Output: 65A
• Voltage - Supply: 2.2 V ~ 10 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: TO-220AB
• Switch Type: Low Side
• Power Switch Family: BTS133
• Power Switch On Resistance: 50mOhm
• Output Current: 7A
• Mounting: Surface Mount
• Package Type: TO-220 SMD
• Operating Temperature (min): -40C
• Operating Temperature (max): 150C
• Operating Temperature Classification: Automotive
• Pin Count: 2 +Tab
• Power Dissipation: 90W
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: BTS133E3064; BTS133E3064NK; SP000011212

1) shear and punch direction no burrs this surface
Package
P-TO220-3-45
Published by
Infineon Technologies AG,
Bereichs Kommunikation
St.-Martin-Strasse 53,
D-81541 München
© Infineon Technologies AG 1999
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of such components can reasonably be expected to
cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device
or system Life support devices or systems are intended to be implanted in the human body, or to support
and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health
of the user or other persons may be endangered.
1.05
2.54
9.9
8
0.75
Ordering Code
Q67060-S6501-A3
1)
0.2
2.4
1.3
4.4
0.5
GPT05164
Page 9
Package
P-TO220-3-1
Ordering Code
Q67060-S6501-A2
19.05.2000
BTS 133