BTS426L1 E3043 Infineon Technologies, BTS426L1 E3043 Datasheet - Page 14
![no-image](/images/manufacturer_photos/0/3/327/infineon_technologies_sml.jpg)
BTS426L1 E3043
Manufacturer Part Number
BTS426L1 E3043
Description
IC HIGH SIDE PWR SWITCH TO220-5
Manufacturer
Infineon Technologies
Series
PROFET®r
Type
High Sider
Datasheet
1.BTS426L1_E3062A.pdf
(14 pages)
Specifications of BTS426L1 E3043
Input Type
Non-Inverting
Number Of Outputs
1
On-state Resistance
50 mOhm
Current - Output / Channel
7A
Current - Peak Output
25A
Voltage - Supply
5 V ~ 34 V
Operating Temperature
-40°C ~ 150°C
Mounting Type
Through Hole
Package / Case
TO-220AB
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
BTS426L1E3043
SP000011243
SP000011243
BTS426L1
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall
not be considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to
warranties of non-infringement, regarding circuits, descriptions and charts
stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and
prices please contact your nearest Infineon Technologies Office in
Germany or our Infineon Technologies Representatives worldwide (see
address list).
Warnings
Due to technical requirements components may contain dangerous
substances. For information on the types in question please contact your
nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support
devices or systems with the express written approval of Infineon
Technologies, if a failure of such components can reasonably be expected
to cause the failure of that life-support device or system, or to affect the
safety or effectiveness of that device or system. Life support devices or
systems are intended to be implanted in the human body, or to support
and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be
endangered.
Semiconductor Group
14
2003-Oct-01