TDA4863-2 Infineon Technologies, TDA4863-2 Datasheet - Page 2

• Manufacturer Part Number: TDA4863-2
• Description: IC PFC CONTROLLER DCM 8DIP
• Manufacturer: Infineon Technologies

Specifications of TDA4863-2

• Mode: Discontinuous Conduction (DCM)
• Current - Startup: 20µA
• Voltage - Supply: 12.5 V ~ 20 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Through Hole
• Package / Case: 8-DIP
• Switching Frequency: 30 KHz to 300 KHz
• Maximum Operating Temperature: + 150 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• For Use With: EVALPFC1-TDA4863-2IN - BOARD DEMO 160W DCM-PFC SMPS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Frequency - Switching: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: SP000014792; TDA48632X; TDA48632XK

TDA4863-2/TDA4863-2G
Revision History:
Previous Version: V2.0
Page
For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or
the Infineon Technologies Companies and Representatives worldwide: see our webpage at http://
www.infineon.com
CoolMOST™, CoolSET™ are trademarks of Infineon Technologies AG.
Edition 2005-02-22
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München
©
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted charac-
teristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infi-
neon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
Infineon Technologies AG 1999.
Subjects ( major changes since last revision )
Update package information
2005-02-22
Datasheet