IR3086AMPBF International Rectifier, IR3086AMPBF Datasheet - Page 31
![no-image](/images/manufacturer_photos/0/3/338/international_rectifier_sml.jpg)
IR3086AMPBF
Manufacturer Part Number
IR3086AMPBF
Description
IC PHASE CONTROLLER OVP 20MLPQ
Manufacturer
International Rectifier
Series
XPhase™r
Datasheet
1.IR3086AMPBF.pdf
(33 pages)
Specifications of IR3086AMPBF
Applications
Processor
Current - Supply
10mA
Voltage - Supply
8.4 V ~ 14 V
Operating Temperature
0°C ~ 125°C
Mounting Type
Surface Mount
Package / Case
20-MLPQ
Ic Function
Phase IC With Fault And OverTemp Detect
Supply Voltage Range
8.4V To 14V, 6V To 25V, 6V To 14V
Operating Temperature Range
-40°C To +150°C
Digital Ic Case Style
MLPQ
No. Of Pins
20
Rohs Compliant
Yes
Package
20-Lead MLPQ
Circuit
X-Phase Phase IC
Iout (a)
2.5A Gate Driver
Pbf
PbF Option Available
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
*IR3086AMPBF
Solder Resist
• The solder resist should be pulled away from the metal lead lands and center pad by a minimum of 0.06mm.
• The minimum solder resist width is 0.13mm. At the inside corner of the solder resist where the lead land
• Ensure that the solder resist in-between the lead lands and the pad land is ≥ 0.15mm due to the high aspect
• The 4 vias in the land pad should be tented with solder resist 0.4mm diameter, or 0.1mm larger than the
The solder resist mis-alignment is a maximum of 0.05mm and it is recommended that the lead lands are all
Non Solder Mask Defined (NSMD). Therefore, pulling the S/R 0.06mm will always ensure NSMD pads.
groups meet, it is recommended to provide a fillet so a solder resist width of ≥ 0.17mm remains.
ratio of the solder resist strip separating the lead lands from the pad land.
diameter of the via.
Page 31 of 33
IR3086APbF
May 13, 2009