CKCM25X5R0J474M TDK Corporation, CKCM25X5R0J474M Datasheet - Page 14
![CAP 2-ARRAY .47UF 6.3V X5R 0504](/photos/0/92/9274/ckcm25x5r0j474m_sml.jpg)
CKCM25X5R0J474M
Manufacturer Part Number
CKCM25X5R0J474M
Description
CAP 2-ARRAY .47UF 6.3V X5R 0504
Manufacturer
TDK Corporation
Series
CKCr
Specifications of CKCM25X5R0J474M
Capacitance
0.47µF
Tolerance
±20%
Temperature Coefficient
X5R
Package / Case
0504 (1210 Metric)
Voltage - Rated
6.3V
Dielectric Material
Ceramic
Number Of Capacitors
2
Circuit Type
Isolated
Mounting Type
Surface Mount
Height
0.035" (0.90mm)
Size / Dimension
0.054" L x 0.039" W (1.37mm x 1.00mm)
Voltage Rating
6.3 Volts
Number Of Elements
2
Operating Temperature Range
- 55 C to + 85 C
Termination Style
SMD/SMT
Dimensions
1.37 mm L x 1 mm W x 2 mm H
Product
Ceramic Capacitor Arrays
Capacitance Tolerance
± 20%
No. Of Elements
2
Capacitor Mounting
SMD
Rohs Compliant
Yes
Dielectric Characteristic
X5R
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
445-1873-2
• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // CKC Series — Array Type Capacitors // Version A11
No.
14
15
*As for the initial measurement of capacitors (Class2) on number 8, 11, 12 and 13, leave capacitor at 150 —10, 0°C for 1
hour and measure the value after leaving capacitor for 24±2h in ambient condition.
General
Specifications
Item
Moisture Resistance
External
appearance
Capacitance
Q (Class 1)
D.F. (Class 2)
Insulation
Resistance
Life
External
appearance
Capacitance
Q (Class 1)
D.F. (Class 2)
Insulation
Resistance
Performance
No mechanical damage.
Characteristics
X7R: 200% of initial spec. max.
X5R: 200% of initial spec. max.
500MΩ min. (As for the capacitors of
rated voltage 16, 10, 6.3V DC,
5MΩ•μF min.)
No mechanical damage.
Characteristics
X7R: 200% of initial spec. max.
X5R: 200% of initial spec. max.
1,000MΩ min. (As for the capacitors of
rated voltage 16, 10, 6.3V DC,
10MΩ•μF min.)
Characteristics
Class 1
Class 2
Rated
Capacitance
30pF and over
Under 30pF
Characteristics
Class 1
Class 2
Rated
Capacitance
30pF and over
10pF and over
under 30pF
Under 10pF
C0G
C0G
X5R
X7R
X5R
X7R
C : Rated capacitance (pF)
C : Rated capacitance (pF)
CKC Series — Array Type Capacitors
Change from the
value before test
±7.5%
± 25 %
Q
200 min.
100+10/3×C min.
Change from the
value before test
± 3%
± 25 %
Q
350 min.
275+5/2×C min.
200+10×C min.
Test or Inspection Method
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) before testing.
Apply the rated voltage at temperature 40±2ºC and 90
to 95%RH for 500 +24,0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning (only for class 2):
Voltage treat the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) before testing.
Below the voltage shall be applied at 125±2ºC for
1,000 +48, 0h.
Applied voltage is 1xRV. Some items may be tested at
higher voltage (1.2x, 1.5x or 2xRV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning:
Voltage treat the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.