DC002-10 NVE, DC002-10 Datasheet - Page 10

• Manufacturer Part Number: DC002-10
• Description: IC SENSOR REG/PWR SW 5.0V 6-TDFN
• Manufacturer: NVE

Specifications of DC002-10

• Applications: Converter, Industrial and Automotive Sensors
• Voltage - Input: 6.2 ~ 36 V
• Number Of Outputs: 1
• Voltage - Output: 5V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 6-TDFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 391-1025-2

DD-Series Signal Processing ICs
For use with ABL-Series Sensors
Features:
•
•
•
•
•
•
Applications:
•
•
•
Description:
The DD-Series signal processing IC is designed to take an analog, sinusoidal input signal such as that
provided by NVE’s ABL-Series sensors and convert it to a two wire, current modulated digital output.
Inputs as small as 2 mV peak-to-peak can be provided to the IC, along with large signal offsets. The
DD001-12 part will provide a 50% duty cycle digital output signal.
The DD001-12 part contains a voltage regulator circuit, programmable amplifier, offset detection and
correction circuitry, and an EEPROM for setting gain and current levels. The voltage regulator output
(3.3V) is used to power the external sensor element, which should be connected between V
V
factory programmed to different levels for specific customer requirements.
Using the DD-Series signal processing IC allows the user to put the sensor element, which can very
small in a remote location, and pipe the signals from the sensor to the DD001-12 for digitizing
purposes. In addition, if two phase shifted sensor outputs are available (such as with the ABL014-00,
ABL015-00, and ABL015-00sensors), two DD001-12 parts can be used to provide two phase shifted
digital signals, for the purpose of detecting the direction of the gear tooth or encoder wheel.
The two-wire output of the DD001-12 can be easily converted to a three-wire current-sinking output
with the circuit shown in the GT Sensor applications section.
GND
Converts Analog Sensor to Digital Operation
Two-Wire Output
50% Duty Cycle
DC (Zero Speed) Operation
Excellent Temperature and Voltage Performance
Small, Low-Profile Surface Mount Package
Linear and Angular Speed Sensing
Linear and Angular Position Sensing
Direction Detection
. Nominal current levels for the current modulated output are 3 mA and 10 mA. These can be
www.nve.com
phone: [phone] fax: [phone]
Peripheral Integrated Circuits
- 70 -
REG
and