S-8357E50MC-NLJT2G Seiko Instruments, S-8357E50MC-NLJT2G Datasheet - Page 18

• Manufacturer Part Number: S-8357E50MC-NLJT2G
• Description: IC REG CTRL PWM 5.0V SOT23-5
• Manufacturer: Seiko Instruments
• Type: Step-Up (Boost)r

Specifications of S-8357E50MC-NLJT2G

• Internal Switch(s): No
• Synchronous Rectifier: No
• Number Of Outputs: 1
• Voltage - Output: 5V
• Current - Output: 100mA
• Frequency - Switching: 100kHz
• Voltage - Input: 0.9 ~ 10 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-5, SC-74A, SOT-25
• Power - Output: 250mW
• Output Voltage: 5 V
• Input Voltage: 10 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Remark 1. V
External parts
With shutdown function :
For V
18
V
STEP-UP, SUPER-SMALL PACKAGE, 600 kHz, PWM CONTROL or PWM/PFM SWITCHABLE SWITCHING REGULATOR CONTROLLER
S-8355/56/57/58 Series
IN
= V
DD
Coil:
Diode:
Capacitor:
Base resistor (R
Base capacitor (C
Transistor:
OUT(S)
/ V
2. V
OUT
A step-up operation is performed from V
the output voltage and oscillation frequency. (V
than 1.9 V.)
× 0.6 applied, I
OUT(S)
DD
separate type : VDD pin is connected to VOUT pin
/ V
OUT
specified above is the set output voltage value, and V
b
separate type
):
b
):
OUT
CDRH6D28-220 of Sumida Corporation
RB461F (Schottky type) of Rohm Co., Ltd.
F93 (16 V, 47 μF tantalum type) of Nichicon Corporation
CPH3210 of Sanyo Electric Co., Ltd.
1.0 kΩ
2200 pF (ceramic type)
ON
= V
/
OUT(S)
OFF
/ 50 Ω
pin is connected to V
Seiko Instruments Inc.
DD
= 0.8 V. However, 1.8 V ≤ V
DD
OUT
≥ 1.8 V must be applied for products with a set value of less
OUT
is the typical value of the actual output voltage.
DD
≤ 10 V is recommended stabilizing
Rev.7.0
_00