6N134#200 Avago Technologies US Inc., 6N134#200 Datasheet - Page 7

• Manufacturer Part Number: 6N134#200
• Description: OPTOCOUPLER 2CH 10MBS 16-DIP
• Manufacturer: Avago Technologies US Inc.

Specifications of 6N134#200

• Input Type: DC
• Package / Case: 16-DIP (0.300", 7.62mm)
• Voltage - Isolation: 1500VDC
• Number Of Channels: 2, Unidirectional
• Current - Output / Channel: 25mA
• Data Rate: 10MBd
• Propagation Delay High - Low @ If: 55ns @ 13mA
• Current - Dc Forward (if): 20mA
• Output Type: Open Collector
• Mounting Type: Through Hole
• Isolation Voltage: 2500 Vrms
• Maximum Continuous Output Current: 25 mA
• Maximum Fall Time: 40 ns
• Maximum Forward Diode Current: 20 mA
• Maximum Rise Time: 90 ns
• Output Device: Logic Gate Photo IC
• Configuration: 2 Channel
• Current Transfer Ratio: 100 %
• Maximum Baud Rate: 10 MBps
• Maximum Forward Diode Voltage: 1.9 V
• Maximum Reverse Diode Voltage: 5 V
• Maximum Input Diode Current: 20 mA
• Maximum Power Dissipation: 200 mW
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 55 C
• Lead Free Status / RoHS Status: Lead free by exemption / RoHS compliant by exemption

Recommended Pb-Free IR Profile
Regulatory Information
The devices contained in this data sheet have been approved by the following organizations:
UL
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice #5,
File CA 88324.
Insulation and Safety Related Specifications
Option 300 - surface mount classification is Class A in accordance with CECC 00802.
7
Parameter
Minimum External
Air Gap (External
Clearance)
Minimum External
Tracking (External
Creepage)
Minimum Internal
Plastic Gap
(Internal Clearance)
Minimum Internal
Tracking (Internal
Creepage)
Tracking Resistance
(Comparative
Tracking Index)
Isolation Group
T
T
smax
smin
25
T
T
p
L
217 °C
150 - 200 °C
t 25 °C to PEAK
60 to 180 SEC.
PREHEAT
3 °C/SEC. MAX.
t
s
RAMP-UP
Symbol
L(101)
L(102)
* 260 +0/-5 °C
CTI
TIME
8-Pin DIP
(300 Mil)
Value
t
t
0.08
L
200
NA
7.1
7.4
IIIa
p
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
15 SEC.
60 to 150 SEC.
RAMP-DOWN
6 °C/SEC. MAX.
Value
SO-8
0.08
200
4.9
4.8
NA
IIIa
Widebody
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01
(HCNW and Option 060 only)
(400 Mil)
Value
10.0
200
9.6
1.0
4.0
IIIa
NOTES:
THE TIME FROM 25 °C to PEAK
TEMPERATURE = 8 MINUTES MAX.
T
NON-HALIDE FLUX SHOULD BE USED.
* RECOMMENDED PEAK TEMPERATURE FOR
smax
WIDEBODY 400mils PACKAGE IS 245 °C
Volts
Units
mm
mm
mm
mm
= 200 °C, T
Measured from input terminals
to output terminals, shortest
distance through air.
Measured from input terminals
to output terminals, shortest
distance path along body.
Through insulation distance,
conductor to conductor, usually
the direct distance between the
photoemitter and photodetector
inside the optocoupler cavity.
Measured from input terminals
to output terminals, along
internal cavity.
DIN IEC 112/VDE 0303 Part 1
Material Group
(DIN VDE 0110, 1/89, Table 1)
smin
= 150 °C
Conditions