SPMD150STP STMicroelectronics, SPMD150STP Datasheet - Page 17

• Manufacturer Part Number: SPMD150STP
• Description: MOD STEPPER MOTOR DRV 1.5A BIPO
• Manufacturer: STMicroelectronics
• Type: Motor / Motion Controllers & Driversr

Specifications of SPMD150STP

• Motor Type: Stepper, Bipolar
• Number Of Motors: 1
• Current - Output: 1.5A
• Transistor Type: MOSFET
• Termination Style: PC Pin
• Product: Stepper Motor Controllers / Drivers
• Operating Supply Voltage: 50 V
• Supply Current: 1.5 A
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10065

SPMD150STP
4.5.2
4.5.3
Figure 17. Half step mode
Normal drive mode (full-step two-phase-on)
A Low level on the HALF/FULL input selects the full step mode.
If the low level is applied when the state ma1chine is at an ODD numbered state, the normal
drive mode is selected.
Figure 18
phase sequencer generator.
The normal drive mode can be selected easily, by holding the HALF/FULL input low and
applying a RESET. AT start -up or after a RESET the state machine is in state1.
After the HALF/FULL input is kept low, state changes following the sequence 1,3,5,7,… if
CW/CCW is high (Clockwise movement) or 1,7,5,3,… if CW/CCW is low (Counterclockwise
movement).
Figure 18. Normal drive mode
Wave drive mode (full-step one-phase-on)
A low level on the pin HALF/FULL input selects the full step mode.
If the low level is applied when the state machine is at an EVEN numbered state, the wave
drive mode is selected.
Figure 19
the phase sequence generator.
To enter the wave drive mode the state machine must be in an EVEN numbered state.
An example of selecting the wave drive mode is the following:
to apply a RESET first;
keeping the HALF/FULL input high, to apply one pulse to the CLOCK input;
then, to apply the logic level Low to the HALF/FULL input.
This sequence first forces the state machine to sate 1.
shows the motor current waveform and the state diagram for the state machine of
shows the motor current waveform state diagram for the state machine of the
Doc ID 17160 Rev 1
Function description and application information
17/23