LQ038Q5DR01 Sharp Microelectronics, LQ038Q5DR01 Datasheet - Page 17

• Manufacturer Part Number: LQ038Q5DR01
• Description: LCD TFT 3.8" 320X240 QVGA
• Manufacturer: Sharp Microelectronics

Specifications of LQ038Q5DR01

• Display Type: LCD - Color
• Display Mode: *
• Viewing Area: 78.72mm L x 53.64mm W
• Dot Pixels: 320 x 240 (QVGA)
• Pixel Density: 320 x 240
• Module Size (w X H X T): 117.5 mm x 69.45 mm x 13.45 mm
• Viewing Area (w X H): 78.72 mm x 53.64 mm
• Backlighting: White
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Interface: -
• Backlight: -
• Dot Size: -
• Dot Pitch: -
• Lead Free Status / Rohs Status: Details
• Other names: 425-2484

（13）Packing form (shown in Fig.5.)
（14）Reliability test
12-3）Precautions in adjusting module
12-4）Caution of product design
12-5）Others
Therefore, do not change any adjusted values. If adjusted values are changed, the specifications
described here may not be satisfied.
appliances.
crystal is deteriorated by ultraviolet rays. Store the module at a temperature near the room
temperature. At lower than the rated storage temperature, liquid crystal solidifies, causing the
panel to be damaged. At higher than the rated storage temperature, liquid crystal turns into
isotropic liquid and may not recover. The voltage of beginning electric discharge may over the
normal voltage because of leakage current from approach conductor by to draw lump read lead line
around. If LCD panel breaks, there may be a possibility that the liquid crystal escapes from the
panel. Since the liquid crystal is injurious, do not put it into the eyes or mouth. When liquid
crystal sticks to hands, feet or clothes, wash it out immediately with soap. Observe all other
precautionary requirements in handling general electronic components.
Piling number of cartons
Package quantity in one carton
Carton size
Total mass of one carton filled with full modules
Conditions for storage.
Adjusting volumes on the rear face of the module have been set optimally before shipment.
The LCD module shall be protected against water salt-water by the waterproof cover.
Please take measures to interferential radiation from module, to do not interfere surrounding
Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours; liquid
Reliability test conditions for the TFT-LCD module are shown in Table 14.
Environment
①Temperature
②Humidity
③Atmosphere
④Period
⑤Opening of the package : In order to prevent the LCD module from breakdown by
: 0∼40℃
: 60%RH or less (at 40℃)
: Harmful gas, such as acid or alkali which bites electronic
: about 3 months
electrostatic charges, please control the room humidity
over 50%RH and open the package taking sufficient
countermeasures against electrostatic charges, such as
earth, etc.
No dew condensation at low temperature and high humidity.
components and/or wires, must not be detected.
: MAX 10
: 50 pcs
: 503 (W)×166 (H)×338 (D) mm
: 7.5kg